Results 1 to 3 of 3

Thread: Paging Scott Pearson

  1. #1
    Join Date
    Jan 2007
    Posts
    887
    Rep Power
    0

    Paging Scott Pearson

    Hello Scott....tried to PM you, but your mailbox is full ...anyway, need a little help on the PPG paint side of things.
    Just fabricated a new tubular steel winch stand for my white Myco trailer..need to prime & paint it...attempting to
    spray paint it myself just picked up 30 gal compressor anyways, recommended is PPG DP481F White epoxy
    primer then finish with top coat PPG DCC single stage......Can you recommend where to buy?.....I'm not far from
    you ..I'm in Jackson.....do I also need hardeners & thinners?........I'm thinking 1 qt. primer & 1 qt. top coat max?
    Any help here would be just great!.........picture of the winch stand enclosed.....thanks, Scippy!
    Attached Images Attached Images
    1983 Cigarette 35' Mistress
    1976 Magnum 27' Sport
    1986 Donzi 18' Classic
    NEVER FORGET 9/11

  2. #2
    Join Date
    Mar 2000
    Posts
    2,444
    Rep Power
    27
    You will need DP48LF with DP402 LF Hardener. DCC Color with DCX61 Hardner as well as DT885 reducer for both. Go to www.ppgrefinish.com and look for products. Both of these will be under Deltron. You can order from Norwood or Flannery Automotive in Freehold or Finish Master in Toms River.

    Hope that helps.

    Scott Pearson
    President, Lake George Donzi Classic Club
    www.lgdonziclassic.com

  3. #3
    Join Date
    Jan 2007
    Posts
    887
    Rep Power
    0
    Thanks Scott.......appreciate it!
    1983 Cigarette 35' Mistress
    1976 Magnum 27' Sport
    1986 Donzi 18' Classic
    NEVER FORGET 9/11

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •