It took most of the summer, but I finally have my Minx running and handling more like it should. Settled with a 23p mirage, 4900 rpm and 66 mph.
Photo is while out for a fall ride on Lake Erie.
It took most of the summer, but I finally have my Minx running and handling more like it should. Settled with a 23p mirage, 4900 rpm and 66 mph.
Photo is while out for a fall ride on Lake Erie.
If the power is is a 350 MAG, 66 is an excellent top end.
Ken
Yes, what he said!
George Carter
Central Florida
gcarter763@aol.com
http://kineticocentralfl.com/
“If you have to argue your science by using fraud, your science is not valid"
Professor Ian Plimer, Adilaide and Melbourne Universities
Nice glad to hear it's working for you
machinist ,bore it deeper,ream it bigger, and lap it to a fine finish
https://www.facebook.com/photo.php?v...=2&theater
Not stock power. Has a 383 stoker @375 hp. Still needs some fine tuning but much better than the 58 it was at a year ago when I bought it. Main lesson learned us this hull does not like a prop with stern lift.
Thank you, Patrick
1994 18' Classic 350Mag Alpha
Previously owned Donzis -
1996 22' Classic, 502Mag Bravo
1987 20' Minx, 350Mag Alpha
1975 18' Classic, 350Chevy Volvo 280
Is this the boat that was for sale on the west coast about a year and a half ago ?
Yes, it was in British Columbia. I bought it last fall.
There are currently 1 users browsing this thread. (0 members and 1 guests)