Results 1 to 10 of 10

Thread: 351 H/M Exhaust Manifolds

Hybrid View

Previous Post Previous Post   Next Post Next Post
  1. #1
    Join Date
    May 2010
    Posts
    70
    Rep Power
    0

    351 H/M Exhaust Manifolds

    I have an X-18 with a 351 H/M Volvo 280 package.
    The motor failed, and I built up a new 351W unit.
    However, I can't get the Redline exhaust manifolds I have to seal properly at the riser gasket.
    I am looking for replacements and don't know what to use.
    Both Redline and Hi-Tek are out of business.
    Stainless Marine does not support Ford products.
    Any advice would be much appreciated.
    Thanks,
    Don

  2. #2
    Join Date
    Sep 2011
    Posts
    1,122
    Rep Power
    0
    Hi Tek is not out of business. Rather, the business is for sale...
    They are still producing exhaust systems.
    Sean Conroy,
    1964 Formula Jr. (hull #2) project

    1972 Greavette Sunflash III
    1981 Kavalk Mistral project

    "A man can accomplish anything... as long as he doesn't care who gets the credit."

  3. #3
    Join Date
    May 2001
    Posts
    10,510
    Rep Power
    34
    Quote Originally Posted by woobs View Post
    Hi Tek is not out of business. Rather, the business is for sale...
    They are still producing exhaust systems.
    they had a few businesses/dealers is this the Stateside co. or the down under co.?
    When the sky is grey,look out to sea.
    When the waves are high and the light is dying,
    well raise a glass and think of me...
    When I'm home again,
    boys, I'll be buying!

    My Ride

    Come Join Us on The Queen Of American Lakes



    Contact Us

    www.lgdonziclassic.com

  4. #4
    Join Date
    May 2001
    Posts
    10,510
    Rep Power
    34
    depending on how hot your motor is center risers may work from barr Osco indmar may be a choice as well

    http://www.cpperformance.com/p-13919...num-riser.aspx


    or there is always a custom set from $$$$$$ CMI $$$$$$$$$$
    When the sky is grey,look out to sea.
    When the waves are high and the light is dying,
    well raise a glass and think of me...
    When I'm home again,
    boys, I'll be buying!

    My Ride

    Come Join Us on The Queen Of American Lakes



    Contact Us

    www.lgdonziclassic.com

  5. #5
    Join Date
    Sep 2011
    Posts
    1,122
    Rep Power
    0
    Quote Originally Posted by mattyboy View Post
    they had a few businesses/dealers is this the Stateside co. or the down under co.?
    I e-mailed Allen (the owner of Hi-Tek in Australia). His response:

    "Hi Sean,

    We're still open for business ,I don’t know who would have said that. If you can, can you get rid of that for me . I only have it for sale as I am 72 and I have been doing it for 25 years its someone else's turn.

    Regards,
    Allen."
    Sean Conroy,
    1964 Formula Jr. (hull #2) project

    1972 Greavette Sunflash III
    1981 Kavalk Mistral project

    "A man can accomplish anything... as long as he doesn't care who gets the credit."

  6. #6
    Join Date
    May 2001
    Posts
    10,510
    Rep Power
    34
    Woobs thanks

    good info


    this is the American company not sure if they are still around

    http://american-hi-tek.com/
    When the sky is grey,look out to sea.
    When the waves are high and the light is dying,
    well raise a glass and think of me...
    When I'm home again,
    boys, I'll be buying!

    My Ride

    Come Join Us on The Queen Of American Lakes



    Contact Us

    www.lgdonziclassic.com

  7. #7
    Join Date
    Sep 2011
    Posts
    1,122
    Rep Power
    0
    They are probably a dealer/distributor. Although looking at their products, they may be an entirely different company.


    At any rate, I always deal direct with Australia (and save)
    Sean Conroy,
    1964 Formula Jr. (hull #2) project

    1972 Greavette Sunflash III
    1981 Kavalk Mistral project

    "A man can accomplish anything... as long as he doesn't care who gets the credit."

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •