I need a couple thermostat housings for my sb Fords. Have y'all run across a source with two 3/4 inch outlets?
Thanks, Craig
I need a couple thermostat housings for my sb Fords. Have y'all run across a source with two 3/4 inch outlets?
Thanks, Craig
24' Nova Sprint 1971
You are what you drive!
woobs just found one kinda hard to find I always search local places for an old skiboat or other SBF donor motor
When the sky is grey,look out to sea.
When the waves are high and the light is dying,
well raise a glass and think of me...
When I'm home again,
boys, I'll be buying!
My Ride
Come Join Us on The Queen Of American Lakes
Contact Us
www.lgdonziclassic.com
Thanks!
Ill keep scrounging 😎
24' Nova Sprint 1971
You are what you drive!
Took me over a year!
Sean Conroy,
1964 Formula Jr. (hull #2) project
1972 Greavette Sunflash III
1981 Kavalk Mistral project
"A man can accomplish anything... as long as he doesn't care who gets the credit."
I. Cut my rotted ends off. Glass beaded the thing and drilled and tapped the two ends to 3/8 pipe thread and got stainless threaded to 1/2 hose ends. Came out real nice. You can put what ever size ends you want on it
There's a web site that tracks 3-D printing companies.
Some are capable of good metal printing.
I can't think of the site name.
George Carter
Central Florida
gcarter763@aol.com
http://kineticocentralfl.com/
“If you have to argue your science by using fraud, your science is not valid"
Professor Ian Plimer, Adilaide and Melbourne Universities
Try 3dhubs.com for a 3d printer near you.
I think this is way to go for unobtanium parts.
Even if the printed part isn't water tight, they could
be dipped in epoxy to make them tight.
George Carter
Central Florida
gcarter763@aol.com
http://kineticocentralfl.com/
“If you have to argue your science by using fraud, your science is not valid"
Professor Ian Plimer, Adilaide and Melbourne Universities
I'll take a picture of it tonight and post it
No luck. I have a good picture. Can't figure out how to send it
When you hit "reply" go to the box below that says "Manage Attachments".
Click on that and look for a green circle with a cross that says "Add Files"...
click that and look for "select Files"...
click that and you can browse your computer for the picture file you want.
Once you find your picture file double click it, then click "open" , "upload files" and then "Done"
Or e-mail it to me dcsconroy@gmail.com
Sean Conroy,
1964 Formula Jr. (hull #2) project
1972 Greavette Sunflash III
1981 Kavalk Mistral project
"A man can accomplish anything... as long as he doesn't care who gets the credit."
Ta DAH!
BTW: This is a very nice piece.
Sean Conroy,
1964 Formula Jr. (hull #2) project
1972 Greavette Sunflash III
1981 Kavalk Mistral project
"A man can accomplish anything... as long as he doesn't care who gets the credit."
There are currently 2 users browsing this thread. (0 members and 2 guests)