I am having an issue with my Volvo AQ 280. Hopefully someone can chime in before I completely tear apart my drive.

Lately I have been going out and it will go in and out of gear just fine.
After a little driving, it will not go into forward. It goes into reverse just fine. No prob.
Sometimes I will shift it into forward 1 click and it will eventually go, but not all the time.
Now, I am not getting it to go at all in forward. Had to slowly make my way home yesterday in reverse.(not too far)

There is oil on the dip stick, no milky oil.
The linkage is working so it is not that.

I did lift the drive up and put it in gear to see if I could see something and the prop does spin, but slowly. Not enough to drive the boat and maneuver.

Any tips before I tear into this?
Does it sound like cone clutch/sliding sleeve?

Thanks all