A new listing for a 1989 Team Warlock 24 Euro ............ $13,000
A new listing for a 1989 Team Warlock 24 Euro ............ $13,000
1972 16 OB - C16B-63 - "Surface Tension" Resto Project
1974 16 OB - DMR16106017-B - "The Mule"
One month later and this 1998 Ultimate Warlock 24' Euro is still for sale. This would make a very good wave crushing family boat with the rare walk through open bow layout. I've only seen one other open bow Euro 24. 78mph is about right but $24,000 is high. It will still be on the market in August at that price
I always thought that it would be a cool project to do a custom flush front glass cover for these Euro 24's.
Do it infused and vacuum bagged, super strong and very light and you can turn it into a closed bow when you want to. Or maybe "Critter it" with a partial front fiberglass removable cover?
I digress ...........
1972 16 OB - C16B-63 - "Surface Tension" Resto Project
1974 16 OB - DMR16106017-B - "The Mule"
1972 16 OB - C16B-63 - "Surface Tension" Resto Project
1974 16 OB - DMR16106017-B - "The Mule"
.
This is interesting and was just posted for sale. A 1989 Team Warlock 24' Euro - hull only. These boats are 25 degree deadrise V's and this one is ready for your motor and drive. It is priced at ............. $5,000
1989 warlock Euro24...no power, drive, etc....(but lots of high end parts!!!)I have bought a new boat and am putting the power, etc... in my new ride. There is A LOT of money invested in this hull! I'm pulling the motor, drive , fuel system, msd ignition, gauges (which I will replace with the gauges from my Daytona), subs and amps.
Here's what you get:
1989 Warlock Euro 24 hull and trailer
full hyd. steering (imco single ram with mayfair helm kit....inside kit has one season on it)
17" Eddie Marine k-planes (1 season)
Dana marine shifter (3 seasons)
reconditioned gimble ring with stainless steel swivel pin (done 4 years ago)
freshly upholstered front and back seats (done 2 months ago)
new carpet (done 2 months ago)
All stereo wiring (incl. 1 gauge power and ground wires with perko switch for 2 batteries and battery boxes) with alpine deck and six Kenwood 6 1/2" mids with separate tweeds .
engine cover with scoop (needs to be reupholstered)
new anodized cup holders and grab handles in the back seat
Stainless Marine exhaust tips (custom made for this boat)
And there is more that's not coming to mind at the moment!
The price is 5k and I could part the boat out for more than that but just don't want to deal with it......I've got another project and this one needs to go to a good home!
If you have any questions please call me. 925-250-9428 (Mark) The boat is located in California. If I don't answer please leave a message and number and I'll get back to you!
1972 16 OB - C16B-63 - "Surface Tension" Resto Project
1974 16 OB - DMR16106017-B - "The Mule"
So now, instead of giving the seller $5,000 you can give him $6,000 and for the extra grand you get a complete Bravo drive as well as a $500 prop. I'm not sure what a Bravo One "X" drive is worth used but this hull with that 620hp Duramax marine diesel that's for sale installed would make for an interesting 80mph+ package.
1972 16 OB - C16B-63 - "Surface Tension" Resto Project
1974 16 OB - DMR16106017-B - "The Mule"
After Stolarz closed shop "Hawaiian" leased the Team Warlock 24 Euro molds and built a few boats. This one, with current colors, is still on the market months later and this particular dealer is known for his mint boats. I have also never seen a Volvo dual prop drive in a Euro. I assume these are very well made drives. Would work very well with the 25 degree deadrise V of the Euro.
Initial price was $16,000 and now down to $14,000
1972 16 OB - C16B-63 - "Surface Tension" Resto Project
1974 16 OB - DMR16106017-B - "The Mule"
I think that the 25' Euro has the nicest lines of the series. This 1994 Team Warlock 25 with stars and stripes colors is for sale. Nice lines
1972 16 OB - C16B-63 - "Surface Tension" Resto Project
1974 16 OB - DMR16106017-B - "The Mule"
1971 Donzi 18' 2+3
1985 Eliminator 23' Daytona Offshore - Kevlar hull
1988 23' Donzi CC F-23 with 250HP EFI Mercury OB
1989 28' Team Warlock Offshore - single 548CID/600HP
1990 23' Warlock Offshore - single 525HP
Bill from Denison, TX - Lake Texoma
Yes, it does Bill, a nice steel float on trailer. If the gelcoat is in nice shape and it comes with a full canvas cover it is a great bargain. As a compare, there is a 1989 24 Euro on the East Coast in excellent shape and he wants $13,000. The only problem is it has the older 370 TRS motor in it.
1972 16 OB - C16B-63 - "Surface Tension" Resto Project
1974 16 OB - DMR16106017-B - "The Mule"
Add the fact that it is $10K OBO and it really looks sweet. I was just out there on a trip with my wife and could have looked at it for someone - .
By the way, I met a young guy at Page, Arizona which is near Lake Powell filling up his Donzi who had a Revolution 4 prop and loves it. I sure wish I had brought a boat for Lake Powell - beautiful!!
1971 Donzi 18' 2+3
1985 Eliminator 23' Daytona Offshore - Kevlar hull
1988 23' Donzi CC F-23 with 250HP EFI Mercury OB
1989 28' Team Warlock Offshore - single 548CID/600HP
1990 23' Warlock Offshore - single 525HP
Bill from Denison, TX - Lake Texoma
How low can it go? Fourth price drop for the 1996 Euro 29. Now the dealer is asking $16,500 ..... Show up with $10k cash and a smile
Edit: Re-listed by the new owner on 6/8/16 for $40,000
I have a 96 28 ft Warlock for sale. I have only had it about a year. I have put a new motor, new drive, and a stereo in the boat. I am only selling it because 90mph is not fast enough to hang with my group of friends. It rides great in rough water and seats 5 to 6 comfortably up top, with two seats and a bed big enough for three under the bow. The paint has a clear coat on it that is faded in some areas but the boat looks great from 15 feet or so.
The motor.. It is a new 548ci Dart block, dart pro 1 ported heads. 8-71 blower and quick fuel 950 carbs. Larry Peto form Larrys enigine and marine in Tucson built the motor. It made 901 - 874 on 7.4lb of boost, and 941 - 911 on 8.6lb of boost.
The drive is an Imco sc and a -2 sportsmaster with a 1 in spacer running a 30 or 32 p 4 blade depending on temp and altitude.
Extras.
Dual hydraulic steering.
Underwater light.
Stereo with 2 Kicker L7 subs, 6 speakers, flip up 7 in DVD player.
The gears in the lower just broke, so every part from the back of the motor to the prop is brand new. All gears, bearings, yoke, shafts, seals, everything!! Also assembled by Larrys engine.
I have more money in the motor and drive than i care to think about. For $40k you are getting a free boat.
Contact Seller: 480-229-8166
1972 16 OB - C16B-63 - "Surface Tension" Resto Project
1974 16 OB - DMR16106017-B - "The Mule"
There are currently 5 users browsing this thread. (0 members and 5 guests)