Ill take some of that global warming right about now ,ive been hunkered down fixing a couple of fiberglass issues , cleaned the tank and ran a new stainless fuel line, and picked up a new wheelwheels done.jpg just hoping the weather comes soon
Ill take some of that global warming right about now ,ive been hunkered down fixing a couple of fiberglass issues , cleaned the tank and ran a new stainless fuel line, and picked up a new wheelwheels done.jpg just hoping the weather comes soon
Nice wheel/insert!
Can you tell me where you got the wheel please ? I'm after one also.
thanks the wheel is from rex marine's web site its a Covico 14 1/2 '' stainless #243116w 85.99$ , I forget if it came with a center cap or if it was extra ,the cap I have didnt come from rex
I'm certainly not telling you how to run fuel lines, nor do I know what your level of experience you have, but when someone mentions fuel and SST, it gets my attention.
SST hasn't been the best choice for gasoline lines or gasoline tanks. If I may suggest at least use double flares on the tubing ends.
Cool looking wheel!
George Carter
Central Florida
gcarter763@aol.com
http://kineticocentralfl.com/
“If you have to argue your science by using fraud, your science is not valid"
Professor Ian Plimer, Adilaide and Melbourne Universities
great looking wheel and hub
yes rex marine is the place to get them
http://shopping.rexmar.com/Merchant2...de=covico3bolt
the wheel pictured looks flat , it could just be the angle of the pic, is it a standard dish ?
When the sky is grey,look out to sea.
When the waves are high and the light is dying,
well raise a glass and think of me...
When I'm home again,
boys, I'll be buying!
My Ride
Come Join Us on The Queen Of American Lakes
Contact Us
www.lgdonziclassic.com
I'm certainly not telling you how to run fuel lines, nor do I know what your level of experience you have, but when someone mentions fuel and SST, it gets my attention.
SST hasn't been the best choice for gasoline lines or gasoline tanks. If I may suggest at least use double flares on the tubing ends.
'' I use swagelok high press tubing and fittings, the stuff is really nice ,'' its used in nucular power plants, alien space ships and gas fired vibrators
If you use stainless tubing with AN fittings it is single flared, but the tool to swage the tubing is $$$$.
Also, if anyone is interested, I have a used OEM wheel from my Donzi. The white is dingy, I didn't try to clean it. Free to a good home!
email johnywhale (at) aol.com can send pics this weekend, I'll have to find it.
You should have a PM in you're mailbox & also sent an email
1999 22' Donzi Classic
1991 31' Tiara Open
Thanks for telling me where to get a wheel from and thanks for posting a link, I've emailed them to see if they ship over seas, I'm in the U.K.
Your boat looks great!
1970 18 2+3 Hull #18-355 H/M 351W Volvo 250
07 Cayman IT IS BACK! - '13 Abarth Cabrio
PRESERVE, DON'T RESTORE
There are currently 1 users browsing this thread. (0 members and 1 guests)