Registered User
I had the original factory acculift actuator and after a while I found it was very slow to the extent that I had to help it manually to even open the sundeck. So I concluded it was giving up and I went out and bought a new hardin marine from cp performance. Installed it and I still need to help it manually to open the sun deck. Now I'm clueless, what is wrong. Is there a factory relay that could have gone bad? Anyone with any ideas?
Paid Subscriber
It certainly sounds as if you are experiencing a power problem.
Could be a bad ground, or bad power lead.
Using a meter, see if you're actually getting 12v to the unit.
Try using a jump wire to ground...get inventive.
GeneD
007
Formerly of Melbourne, Florida
Permanent Resident of St. Petersburg, Florida
1966 Classic 18-2+3
Scorpion Gold Member
Is the hatch / Foam full of water? can you lift it by hand?
is the battery 12 volts or greater?
With the motor running is it the same issue?
That cover is heavy.
2000 28ZX Scorpion SOLD
1979 Criterion
1986 Z29
RED/WHITE
TWIN SBC 330HP
ALPHA 1'S
Mcleod design Interior
There are currently 1 users browsing this thread. (0 members and 1 guests)
Posting Permissions
Reply With Quote