At 850HP I'd be interested in checking out the stringer grid and mounts for the motor.
At 850HP I'd be interested in checking out the stringer grid and mounts for the motor.
"I don't have time to get into it, but he went through a lot." -Pulp Fiction
Agree. There is an interesting speed trend developing with these 24 degree Ultimate Warlock World Class 29 hulls that are for sale. Late 1996 would've been the first year for this hull.
Stock 502MPI spinning a Bravo One 26" making 415 hp................ 67 MPH..........$29,000
Stock 500 EFI spinning a labbed Bravo One 28" making 500 hp ......80 MPH..........$32,500
Blower 502 making 650 hp .................................................. ......92 MPH..........$46,980..........Sold 4-1-13
Blower 568 spinning a Bravo One 34" making 850 hp.....................100 MPH.........$42,000
Interesting when you consider smidgen too's comment on how hard they were to beat on the race course.
1972 16 OB - C16B-63 - "Surface Tension" Resto Project
1974 16 OB - DMR16106017-B - "The Mule"
That is an interesting roll-up of speed vs. HP. Seems plausible for an efficient 29' deep-v.
I guess the outlier is the boat in OKC with the blower shop 525 @ 750hp running 84? Maybe he's toting a REALLY big cooler? That or a little high on his hp estimate, which seems more probable.
Either way, these are awesome boats. Seem to be priced realistically as well. They're definitely on my radar for when mama and I are ready to graduate from the bowrider to a go fast.
"Speed's fine, but accuracy is final."
- Bill Jordan
1998 Donzi 21LXR
1971 Boston Whaler 13
Looks like the 2003 Warlock 29 just dropped his price from $45k to $37k. That is a hefty reduction. Below is a brochure from late 1997. The boys liked to race 'em I guess.
29 ft warlock world class with 575 merc. 750 hp. Brand new blower shop blower. New axles on trailer. Boat Gps at 84 mph. Very clean boat inside and out. Please call 412-3461 and talk to blake Location: Oklahoma city
1972 16 OB - C16B-63 - "Surface Tension" Resto Project
1974 16 OB - DMR16106017-B - "The Mule"
I was wondering about the speeds of these Warlock 29's as well. The pad on the 29 is a bit different than the 25 and 27 I guess because the 1996 29 was the first model they built, raced, and experimented with. Pad looks to be almost flat and maybe 8" wide. 73mph with a 496HO is pretty sweet.
1972 16 OB - C16B-63 - "Surface Tension" Resto Project
1974 16 OB - DMR16106017-B - "The Mule"
Interesting to see that close up of the bottom. I suppose that technically it's a deep V, but between the pad and those huge (can you call them strakes?), it seems like a good bit of it is very flat back there, at least near the transom. Explains some of the speed data. I bet the effective deadrise is more like 11 degrees at high speed when it's mostly up out of the water.
"I don't have time to get into it, but he went through a lot." -Pulp Fiction
I gotta get a good picture of the hull on my lowly bowrider. It's a 21deg deep vee between the strakes, with a 8 inch wide shallow vee pad extending from the step to the transom. I think it's pretty sexy for a floating party barge - definitely not a traditional runabout hull.
She doesn't have enough beans to get all the way up on the pad yet, but you guys better stand by for when I get this sucker running and propped right....
"Speed's fine, but accuracy is final."
- Bill Jordan
1998 Donzi 21LXR
1971 Boston Whaler 13
Other guys with more experience on the site would know better but I believe that Delta Pad's and Steps were becoming very popular back in 1996. When conditions are snotty you benefit from the 24 degree deadrise because the hull is settled when running slower. If conditions allow, "kaboom" the hull step aerates and then pops up on that pad. It gives me 10mph extra on my 16 Classic, so I guess that same principle gave the Warlock's a pretty major speed advantage over other 29's back in the day. The pad shown below on a 29 is almost flat.
1972 16 OB - C16B-63 - "Surface Tension" Resto Project
1974 16 OB - DMR16106017-B - "The Mule"
The Warlock website write-up on the 29 WC ............
1972 16 OB - C16B-63 - "Surface Tension" Resto Project
1974 16 OB - DMR16106017-B - "The Mule"
Hey, I swear that step underwater pic is used in a Regal ad...
"I don't have time to get into it, but he went through a lot." -Pulp Fiction
Correct, and gives a pretty cool look at what a step does to wetted surface I guess. Although once you are flying the hull is balanced on the pad for the most part. At least that is how mine works.
1972 16 OB - C16B-63 - "Surface Tension" Resto Project
1974 16 OB - DMR16106017-B - "The Mule"
How is a "serpentine step" different from a regular one?
"I don't have time to get into it, but he went through a lot." -Pulp Fiction
Hell if I know, although it clearly dominated the race course and was 10mph faster than like powered V hulls back in the late 90's. Now I'm curious and will find out lol. Here is a good arial photo of a 29 Warlock mid-cabin open bow. Very useful pleasure layout.
1972 16 OB - C16B-63 - "Surface Tension" Resto Project
1974 16 OB - DMR16106017-B - "The Mule"
There are currently 3 users browsing this thread. (0 members and 3 guests)