Trim Tab Indicator Mounting Location?

[RockyS18]

I plan on installing mechanical trim tab indicators this winter and I was wondering where people mount theirs.
I would do something like this if possible:
I can't mount it to the right of the steering wheel because there is a low-opacity Donzi 009 logo there. Does anyone have recommendations?

If I can't fit the vertical style indicator anywhere there, has anyone used pop-up indicators? I'm worried that they might not fit under the windshield when fully extended.

[gcarter]

Livorsi makes a nice "heads up display" type that helps w/the indicator cable arrangement, also it'll let you put it where the decal iis.

[gcarter]

Also, it's not really flat to the right of the wheel..................

[Scott Pearson]

Here ya go!

[bertsboat]

Scott,
Yours is missing a line on the DRIVES side of the indicator or He misspelled DRIVE. Somebody messed up.
TABS
DRIVE
Looks cook anyway you spell it!

[RockyS18]

l_www.donzimarine.comassetsseries5622c2000920int27uih0.jpg

I was hoping to not get rid of that 009 logo, and it actually is flat there. Same flatness as where the radio receiver is. Even if I put the trim tab indicator there (I realize the pic has drives too, but I don't need a drive indicator) it wouldn't cover up the whole logo. There's an old Vessel View laying around at my friend's place, maybe that will fit there?

Does anyone know a Donzi with a pop-up trim tab indicator mounted under the windshield?

[mattyboy]

rocky

do a search on Parnell's GT ( board name sweet cheeks) the boat is called fair warning he has the pop up gauge in the dash

[jl1962]

I was thinking the same thing.

Somewhere around page 21 and post 302 of this thread!

http://www.donzi.net/forums/showthre...ht=gt+21+sweet

Awesome boat. Didn't Mick's 22 w/ the very customized interior have something similar?

[gcarter]

Thde "heads up" is what i was referring to earlier, is no longer in the Livorsi catalog.

[mattyboy]

stainless marine still makes the heads up

http://www.cpperformance.com/csearch...id&Search=trim

looks like they have a speiling issue if you want you can get their number off of Pearson's photo or you can try and work your way thru their FUBARED
website.

http://www.stainlessmarine.com/


not sure if the heads up will have clearance issues they would need to be far enough back not to mess with the gauges or wiring but not to far back to allow full travel of the indicators before they hit the windshield

[Ghost]

Looking at the pic, Mick's boat appears to have stick-style indicators for the tabs, with a trim gauge for the drive.

tab indicators and trim gauge.JPG

[RickSE]

Here are some pictures of my tab indicator location. It worked out well since the cables came right out the bottom of the indicator panel and go through a hole in the front inner cockpit liner. You can't see the cables unless you crawl under the dash.

http://www.donzi.net/forums/showthre...highlight=dash

[BlakeSullivan]

I put these in my 22 a couple of years ago

[bertsboat]

Too bad they are not flush when everything is in the neutral position. That way they would be flush and out of sight till you start trimming up on the drive and down on the tabs, as opposed to the other way around. I am sure everyone that looks at them asks you "WHATS THAT?"
Just a thought.

[mattyboy]

if they are flush for nuetral trim how do you show negative trim?