Do yourself a favor and get a aluminum plate behind the bow cleat. If you have to drag the boat on the trailer for some reason the bolts will sink in the wood and loosen it letting water in. I also put in a battery shelf (16's don't have one) and a shelf for the trim pump. I really think my best idea was to put in a piece of PVC pipe so I can run the fuel line in it so it wont sag. Any boat I have taken apart had the fuel line held to the stringers with wire looms but they all break over time. Never have to worry about that again. Some winglets like you have done and some wood where the trailer tie downs are in the transom.
A winner is just a loser that got up and did it one more time. 1959 Biesemeyer - 4pt Hydro Drag - 2013 ACBS Winner - Best Race Boat
1967 Nova Marine - SuperNova24 - ACBS Winner - 2012 Best Race Boat - 2016 Peoples Choice & Best Non Wood 1972 John Allmand - Nova 19
1972 John Allmand - Nova19 (#2)
1982 PolarKraft -Jonboat - Crab Killer