Anybody have experience with DAH Props?

[John C in PA]

They gave me excellent advice on a different prop for my rig, a 21" SST which got me 450 RPM, a 2-3 MPH (GPS) increase and eliminated the chine walk (all compared to the 23" Viper). Now they tell me there are some changes that can be made to further improve performance. Roughly $300 IIRC. Has anyone had DAH work on their prop? Good work? Bad?

All input appreciated, John C

[tmdog]

Did business w/ Dah. Very knowledgeable and most reasonable. Fixall on the board turned me on to them.

[The Hedgehog]

I would give him a shot!

[John C in PA]

I just got my SST back from Dah. They checked the pitch, added cup, thinned the leading edges, and polished the blades. I gave John all the details of my 16 and how I use it so he thinned the blades for high speed recreational (thin) not racing (thinner). Still, its easy to feel the difference from the OEM rounded leading edges.

Unfortunately it'll be a long coupla months until I can check the results of the mods . And the price was more than fair .

John C in PA

SANY0393.JPGSANY0397.JPG