getting ready to paint the engine....seal up kit??

[JayZ]

Hey folks,

I'm about to spray the 502 crate motor in donzi teal to match the stripe and color accents on my classic 22.

I seem to recall seeing a link to a pretty nifty little seal up kit to cover all the ports and holes on the engine that some have used prior to painting. ...seems a whole lot easier than taping although that is an easy option too.

Can anyone direct me where I might look for these?

Thanks,

Jay

[CHACHI]

Jay, try George Carter, he just went thru this.

ken

[gcarter]

Yes, by all means, get yourself a Jaz kit!
They're available at any of the hot rod on line stores for about $20-$25.
As you can see there's a part for every hole.
They work great.
All the little holes, i.e., spark plug, bolt holes, etc have small pieces of wadded up paper towel stuck in them.

[JayZ]

Thanks dudes!

[biggiefl]

Also when you buy a crate engine it comes with a kit like that except not as nice and does not bolt in. You could probably score one for a few $$ if only going to use it once or twice.

[Barry Eller]

Hey Jay, do you have that 502 painted and installed yet?