Page 9 of 12 FirstFirst ... 5 6 7 8 9 10 11 12 LastLast
Results 121 to 135 of 176

Thread: Team Warlock 23 - Not Mine

  1. #121
    Join Date
    Sep 2005
    Posts
    5,511
    Rep Power
    0
    This purchase qualifies for the best deal of 2014, and it's only March. On speed, with a 4 1/4" drive depth I believe you will GPS a clean 80mph. These hulls are very fast but I don't see 85mph with a stock Bravo One drive. The Left coast crowd does not take to the old school look in boats so they have little interest in Team Warlock's. Makes for a nice arbitrage play if you are patient. Looking forward to the start of a new thread on this one upon arrival!
    1972 16 OB - C16B-63 - "Surface Tension" Resto Project
    1974 16 OB - DMR16106017-B - "The Mule"

  2. #122
    Join Date
    Sep 2005
    Posts
    5,511
    Rep Power
    0
    Quote Originally Posted by yeller View Post
    Congrats on the purchase. I didn't think it was going to last long at that price. I saw that the ad got pulled shortly after Greg posted it, but I was still going to call the guy and if it was available when I went down in a few weeks I was going to buy it an pull it back home. If it runs half decent, I think you got a screamin' deal! Enjoy!
    Quote Originally Posted by Greg Guimond View Post
    This boat Team Warlock Euro 24 is back on the market, reduced $2,000 because of the ugly photo with the bimini to $14,900

    "I have a 1989 24' Warlock Euro Deep V high performance boat for sale. It is in very nice condition, fresh Mercruiser 7.4L 330HP carb motor, Bravo 1 outdrive, stainless prop, Stainless Bimini top, and full custom boat cover. Engine only has 130 hours on it, all the fluids, filters is fresh. Engine sounds awesome! It has a electric powered rear hatch cover, Pioneer MP3 stereo with remote, new battery, new bilge pump, new hydraulic steering, and all new rubber bellows on the outdrive. Some of the interior has been redone in carbon fiber vinyl, and looks very, very sharp, no fade no tears. Seating arrangement is 5 passengers, and an large closed bow up front. These are very rare hulls, and are fast, strong, can run in rough water, 65 MPH boat on stock motor. It sits on a custom Competitive tandem axle trailer, black powder coated, filleted welds. If you are interested, please contact me. I may consider trades for other boats, off road vehicles, RV toy hauler, etc... I have ownership paperwork in hand for trailer, and boat. 480-205-6542 no text"
    Yeller, this 1988 24 Euro is only a 60 minute plane ride away in Phoenix if your lookin to go walkabout and I happen to know he is VERY motivated to sell it. He'll never come close to getting $15k for a variety of reasons. The trailer is a 1995. Competitive built a very high quality trailer. I know you have a soft spot for the Euro's and you certainly won't see another one in Canada
    Attached Images Attached Images  
    1972 16 OB - C16B-63 - "Surface Tension" Resto Project
    1974 16 OB - DMR16106017-B - "The Mule"

  3. #123
    Join Date
    Sep 2005
    Posts
    5,511
    Rep Power
    0
    Very nice color combo and a bit more modern looking. Also has that scoopy thing already there so when you put that massive blower motor in it there will be space
    Attached Images Attached Images  
    1972 16 OB - C16B-63 - "Surface Tension" Resto Project
    1974 16 OB - DMR16106017-B - "The Mule"

  4. #124
    Join Date
    May 2007
    Posts
    3,819
    Rep Power
    14
    Quote Originally Posted by Greg Guimond View Post
    This purchase qualifies for the best deal of 2014, and it's only March. On speed, with a 4 1/4" drive depth I believe you will GPS a clean 80mph. These hulls are very fast but I don't see 85mph with a stock Bravo One drive. The Left coast crowd does not take to the old school look in boats so they have little interest in Team Warlock's. Makes for a nice arbitrage play if you are patient. Looking forward to the start of a new thread on this one upon arrival!
    I put it up for bid on Uship last night and already have 11 bids. It might get here by this weekend - I will start a new thread when it arrives. I just got off the phone with Keith about the trailer - it turns out the mags, tires, bearings and brakes are all new with less than 500 miles! It keeps getting better.

    1971 Donzi 18' 2+3
    1985 Eliminator 23' Daytona Offshore - Kevlar hull
    1988 23' Donzi CC F-23 with 250HP EFI Mercury OB
    1989 28' Team Warlock Offshore - single 548CID/600HP
    1990 23' Warlock Offshore - single 525HP
    Bill from Denison, TX - Lake Texoma

  5. #125
    Join Date
    Jul 2004
    Posts
    2,892
    Rep Power
    17
    Quote Originally Posted by Greg Guimond View Post
    Yeller, this 1988 24 Euro is only a 60 minute plane ride away in Phoenix if your lookin to go walkabout and I happen to know he is VERY motivated to sell it. He'll never come close to getting $15k for a variety of reasons. The trailer is a 1995. Competitive built a very high quality trailer. I know you have a soft spot for the Euro's and you certainly won't see another one in Canada
    Stop it Greg!! You already got Bill to buy a Warlock. Leave me alone!

    I do have a soft spot for the Euro's. Just have a bigger soft spot for my 22C and I can't use 2 boats. I'm glad Bill picked up the Warlock. I was only going to buy it to flip. I'm pretty sure I could have made $6k on that boat up here.
    Why is faster never fast enough.

  6. #126
    Join Date
    May 2007
    Posts
    3,819
    Rep Power
    14
    I settled on a $865 bid on Uship to get it here from Las Vegas- a 1215 mile trip. The hauler has perfect feedback and sounds fine on the phone so I now wait until Monday/Tuesday to see the boat.

    1971 Donzi 18' 2+3
    1985 Eliminator 23' Daytona Offshore - Kevlar hull
    1988 23' Donzi CC F-23 with 250HP EFI Mercury OB
    1989 28' Team Warlock Offshore - single 548CID/600HP
    1990 23' Warlock Offshore - single 525HP
    Bill from Denison, TX - Lake Texoma

  7. #127
    Join Date
    Sep 2005
    Posts
    5,511
    Rep Power
    0
    Quote Originally Posted by yeller View Post
    Stop it Greg!! You already got Bill to buy a Warlock. Leave me alone!

    I do have a soft spot for the Euro's. Just have a bigger soft spot for my 22C and I can't use 2 boats. I'm glad Bill picked up the Warlock. I was only going to buy it to flip. I'm pretty sure I could have made $6k on that boat up here.

    Sorry 'bout that yeller. If I get a good one in the Northeast .............
    1972 16 OB - C16B-63 - "Surface Tension" Resto Project
    1974 16 OB - DMR16106017-B - "The Mule"

  8. #128
    Join Date
    Sep 2005
    Posts
    5,511
    Rep Power
    0
    Quote Originally Posted by Conquistador_del_mar View Post
    I settled on a $865 bid on Uship to get it here from Las Vegas- a 1215 mile trip. The hauler has perfect feedback and sounds fine on the phone so I now wait until Monday/Tuesday to see the boat.
    Team Warlock "World Class 23 Offshore" heading to the lone star state.
    1972 16 OB - C16B-63 - "Surface Tension" Resto Project
    1974 16 OB - DMR16106017-B - "The Mule"

  9. #129
    Join Date
    May 2007
    Posts
    3,819
    Rep Power
    14
    Quote Originally Posted by yeller View Post
    Stop it Greg!! You already got Bill to buy a Warlock. Leave me alone!

    I do have a soft spot for the Euro's. Just have a bigger soft spot for my 22C and I can't use 2 boats. I'm glad Bill picked up the Warlock. I was only going to buy it to flip. I'm pretty sure I could have made $6k on that boat up here.
    I never mentioned what I paid - $10k. Unless there is something really wrong with it, I will be really pleased with the purchase. Keith has been wonderful to work with, too. I am still surprised he didn't find a local buyer, but I'm not finding a local buyer on my Cig either - two of the interested parties are from Ohio and one is from Georgia - go figure

    1971 Donzi 18' 2+3
    1985 Eliminator 23' Daytona Offshore - Kevlar hull
    1988 23' Donzi CC F-23 with 250HP EFI Mercury OB
    1989 28' Team Warlock Offshore - single 548CID/600HP
    1990 23' Warlock Offshore - single 525HP
    Bill from Denison, TX - Lake Texoma

  10. #130
    Join Date
    Sep 2005
    Posts
    5,511
    Rep Power
    0
    Very difficult to sell these boats in the Havasu-Vegas area. The white one isn't selling either. All the river rafters want rounded lines and crazy wild gel fades. Keith started at $20k, I was pretty serious at $15k but then the 23XRI Mid-Cabin with a 496HO showed up so I got distracted. You'll probably need to do some stuff to it Bill for sure, but I doubt much, and for $10k there is room to sort it out. Two things will be of interest, is it a cored model, and are the colors standard or a custom order from the factory. Nice work!
    1972 16 OB - C16B-63 - "Surface Tension" Resto Project
    1974 16 OB - DMR16106017-B - "The Mule"

  11. #131
    Join Date
    May 2007
    Posts
    3,819
    Rep Power
    14
    Greg, the first thing I want to check out is the engine followed by crawling up front to see if it is cored. In many ways I am buying a pig in a poke here, but I was satisfied with Keith's answers to my questions.

    1971 Donzi 18' 2+3
    1985 Eliminator 23' Daytona Offshore - Kevlar hull
    1988 23' Donzi CC F-23 with 250HP EFI Mercury OB
    1989 28' Team Warlock Offshore - single 548CID/600HP
    1990 23' Warlock Offshore - single 525HP
    Bill from Denison, TX - Lake Texoma

  12. #132
    Join Date
    Jul 2004
    Posts
    2,892
    Rep Power
    17
    Quote Originally Posted by Conquistador_del_mar View Post
    I never mentioned what I paid - $10k. Unless there is something really wrong with it, I will be really pleased with the purchase. Keith has been wonderful to work with, too. I am still surprised he didn't find a local buyer, but I'm not finding a local buyer on my Cig either - two of the interested parties are from Ohio and one is from Georgia - go figure
    $10K!!!!!!!
    Now I am no longer happy for you. I really could have made some $$$.
    Why is faster never fast enough.

  13. #133
    Join Date
    May 2007
    Posts
    3,819
    Rep Power
    14
    Quote Originally Posted by yeller View Post
    $10K!!!!!!!
    Now I am no longer happy for you. I really could have made some $$$.
    I will try to point out all the flaws and problems to lessen the sting -

    1971 Donzi 18' 2+3
    1985 Eliminator 23' Daytona Offshore - Kevlar hull
    1988 23' Donzi CC F-23 with 250HP EFI Mercury OB
    1989 28' Team Warlock Offshore - single 548CID/600HP
    1990 23' Warlock Offshore - single 525HP
    Bill from Denison, TX - Lake Texoma

  14. #134
    Join Date
    Sep 2005
    Posts
    5,511
    Rep Power
    0
    We fully expect that you will be posting pics like this one once you get her in house and sorted ............
    Attached Images Attached Images  
    1972 16 OB - C16B-63 - "Surface Tension" Resto Project
    1974 16 OB - DMR16106017-B - "The Mule"

  15. #135
    Join Date
    May 2007
    Posts
    3,819
    Rep Power
    14
    Thanks for the inspiring picture Greg. After making a couple phone calls today, it looks like the Warlock will be picked up Tuesday morning and possibly delivered Wednesday afternoon.

    1971 Donzi 18' 2+3
    1985 Eliminator 23' Daytona Offshore - Kevlar hull
    1988 23' Donzi CC F-23 with 250HP EFI Mercury OB
    1989 28' Team Warlock Offshore - single 548CID/600HP
    1990 23' Warlock Offshore - single 525HP
    Bill from Denison, TX - Lake Texoma

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •