Page 17 of 20 FirstFirst ... 7 13 14 15 16 17 18 19 20 LastLast
Results 241 to 255 of 295

Thread: 1989 Team Warlock 28' World Class Offshore

  1. #241
    Join Date
    Sep 2005
    Posts
    1,056
    Rep Power
    0
    Bill - According to my mechanic there is problem turning a bravo the other direction. When testing my Magnum I spun mine in/out many times with no issues and that's doing full throttle runs. Just be careful docking...
    1978 Magnum Starfire "MAYHEM"
    1994 Donzi 22 Classic 540/Blackhawk - Sold
    1982 Midnight Express 32 SS

  2. #242
    Join Date
    May 2007
    Posts
    3,851
    Rep Power
    20
    Thanks Marshall. Here is a low quality picture that shows the port IMCO steering ram that I just installed to make it dual ram along with showing the hole in the upper transom assembly that was filled after being hole sawed out for access to the swivel pin replacement procedure.
    Attached Images Attached Images

    1971 Donzi 18' 2+3
    1985 Eliminator 23' Daytona Offshore - Kevlar hull
    1988 23' Donzi CC F-23 with 250HP EFI Mercury OB
    1989 28' Team Warlock Offshore - single 548CID/600HP
    1990 23' Warlock Offshore - single 525HP
    Bill from Denison, TX - Lake Texoma

  3. #243
    Join Date
    Sep 2005
    Posts
    5,802
    Rep Power
    0
    Ran across another survivor 28 ........
    Attached Images Attached Images
    1972 16 OB - C16B-63 - "Surface Tension" Resto Project
    1974 16 OB - DMR16106017-B - "The Mule"

  4. #244
    Join Date
    Sep 2005
    Posts
    5,802
    Rep Power
    0
    And another 1990 28 with twin 454's making 500hp each. Top speed is 86mph with Bravos. For sale actually for $25,000 with a triple axle trailer. Sits a little stern heavy.
    Attached Images Attached Images
    1972 16 OB - C16B-63 - "Surface Tension" Resto Project
    1974 16 OB - DMR16106017-B - "The Mule"

  5. #245
    Join Date
    May 2007
    Posts
    3,851
    Rep Power
    20
    Greg,
    I'll bet that red one is sitting on a Competetive trailer which is made in California. Good looking boats you posted and 86MPH is getting up there! I have not had a chance to run mine yet since I've been sick and the weather is not cooperating. Sold my Cigarette Mistress yesterday.

    1971 Donzi 18' 2+3
    1985 Eliminator 23' Daytona Offshore - Kevlar hull
    1988 23' Donzi CC F-23 with 250HP EFI Mercury OB
    1989 28' Team Warlock Offshore - single 548CID/600HP
    1990 23' Warlock Offshore - single 525HP
    Bill from Denison, TX - Lake Texoma

  6. #246
    Join Date
    Sep 2005
    Posts
    5,802
    Rep Power
    0
    I ran across this original Team Warlock factory invoice for the little 23' Offshore model ................
    Attached Images Attached Images
    1972 16 OB - C16B-63 - "Surface Tension" Resto Project
    1974 16 OB - DMR16106017-B - "The Mule"

  7. #247
    Join Date
    May 2007
    Posts
    3,851
    Rep Power
    20
    This afternoon, I finished installing a new power steering control valve actuator (pain in the butt) to see if I could finally get the steering shudder problem corrected after trying other remedies which did not fix the problem. I fired it on the hose and the problems went away - steering is now fixed with dual ram IMCO external steering as a nice addition to the preexisting single ram and it now takes equal force turning either direction. I was not able to test the new Revolution 4 25P prop with the continued steering problem and I had to winterize the boat since we have 16 degree nasty winter mix weather headed our way. I'll report speed/RPM info later. If anyone has this steering shudder problem that makes the outdrive go back and forth violently, consider the actuator valve as a possible culprit. After pulling the old valve, I found a significant bulge in the end of the part that is threaded that is supposed to be flat. Apparently something let go inside the actuator. Onwards.

    1971 Donzi 18' 2+3
    1985 Eliminator 23' Daytona Offshore - Kevlar hull
    1988 23' Donzi CC F-23 with 250HP EFI Mercury OB
    1989 28' Team Warlock Offshore - single 548CID/600HP
    1990 23' Warlock Offshore - single 525HP
    Bill from Denison, TX - Lake Texoma

  8. #248
    Join Date
    Sep 2005
    Posts
    1,056
    Rep Power
    0
    Hopefully that's the end of it Bill. Too bad about the weather, we actually had 55 deg and flat calm wind today here and I snuck out.
    1978 Magnum Starfire "MAYHEM"
    1994 Donzi 22 Classic 540/Blackhawk - Sold
    1982 Midnight Express 32 SS

  9. #249
    Join Date
    Sep 2005
    Posts
    5,802
    Rep Power
    0
    Bill I guess no more Team Warlock tests this year. Aren't you guys shutting down Texas due to ice?
    1972 16 OB - C16B-63 - "Surface Tension" Resto Project
    1974 16 OB - DMR16106017-B - "The Mule"

  10. #250
    Join Date
    May 2007
    Posts
    3,851
    Rep Power
    20
    Nasty here in north Texas - 22 degrees at noon with 4"+ of sleet and dropping to 8-11 degrees tonight with more winter mix on the way. Hardly anyone is out on the roads. The Warlock is the last boat my mechanic friend winterized with his antifreeze setup when I took it over on Wednesday and we ran it together - .

    1971 Donzi 18' 2+3
    1985 Eliminator 23' Daytona Offshore - Kevlar hull
    1988 23' Donzi CC F-23 with 250HP EFI Mercury OB
    1989 28' Team Warlock Offshore - single 548CID/600HP
    1990 23' Warlock Offshore - single 525HP
    Bill from Denison, TX - Lake Texoma

  11. #251
    vciaszqm Guest

    експлуа

    Инструкции бесплатно инструкция телефона di 5931эпсон 4880 инструкцияпаспорт автомагнитола panasonic cq 1321nинструкция по обновлению сайтаокорочный станок инструкцияинструкция за mp3 модулатордолжная инструкция зав методического кабинетапароконвектомат пка 6 1 1 пм инструкцияпосмотреть инструкцию к daewoo hc 4260xинструкция на испытание импульсных линийhonda dio 35 zx инструкция по ремонтуmitsubishi colt 2005 руководство пользователяинструкция по проведению адпн на нефтяных скважинахhusqvarna 236 руководствоавтосигнализация flashpoint s5vertu описание и инструкция к телефонуинструкция пограммы 25 кадр похудениеинструкция по паользованию фотошопом на русском языкекак совать член в пиздуинструкция по установке и настройке пак уикруководство по эксплуатации автомобиля ваз 21099download manual furunoинструкция по эксплуатации фх 35инструкция как разобрать ноутбук lenovo v560инструкция tif rx 1aруководство по sony kdl 40w5500инструкция по эксплуатации стиральной машины индезит wp 1040 txrиз новостей французские металлурги взяли в заложники руководство заводаsamsung gt c3212 разборкаинструкция конвой xs8samsung n150 q samsung n150 plus руководствокак сдела трансформера инструкцияинструкция как работать с сайтом госзакупкиинструкция верту f480ремонт швейной машины подолкаскачать сервис мануал по ремонту honda civic 4dинструкция к конфидор максинструкция на касби в народею руtpm101 настройкастиральная машина siemens инструкция xs862инструкция ремонт амкадорруководство по sound forge 9инструкция для стиральной машины занусси f505 скачать бесплатнорусская инструкция prs 650бесплатно инструкция alpine tdm 7547rнастойка элеутерокока анатациявыпрямитель вс400iamm ntr90 интсрукцияtd w8910g руководство пользователяиж 21251 2715 01 27151 01 27156 руководство

  12. #252
    vciaszqm Guest

    zelmer 919 0 st инст&

    Инструкции русская инструкция prs 650замена крестовины на ваз 2107из спичек пошаговая инструкцияинструкция по эксплуатации дорожного шлагбаума faacadobe photoshop cs6 руководство пользователяинструкция по эксплуатации додж караван бесплатноприказ о разрботке инструкций по охране трудаинструкция по оценке качества лекарственных средств изготовляемых в аптекахэпл даймонд в москве руководство директораруководство по ремонту lacetti 2006 2009инструкция digis m6скачать бесплатно техническое руководство по эксплуатации мини куперразборка netgear wgr612описание и правила пользования огнетушителем оп 9nikon coolpix s 200 инструкция на русском языкеремонт инструкция einhell ste 5500инструкция к пневмопистолетуинструкция автомагнитолы soundmax sm cmd2022руководство пользователя mobilemeдоводчик king инструкцияcanon ip4500 разборкатехника безопасности в общепите скачать бесплатноруководство по пользованию canon mp 250руководство по ремонту и эксплуатации chrysler voyager 1993инструкция geo tx 8907инструкция телефона tadiranadobe photoshop elements 6 инструкция для пользователейсбербанк рф инструкция по услуге мобильный банкинструкция для конструктора лего военный самолет куплен бегемоте 2009 годflexbox t 110 upgradeскачать руководство по эксплуатации стиральных машин индезит wgs 630инструкция пользования для навигатор престиж 5120roland e66 manualинструкция индезит iwb 5105 скачать бесплатноскачать сервисную инструкцию для nokia 3250инструкция к телефон siemens ce 0682инструкция по обработке мочалок раствор известискороварка советская инструкция читатьдокси хем инструкциямануал сони эриксон с5000должная инструкция цех обоиmitsubishi carisma скачать руководство бесплатноскачать инструкцию на panasonic 7230 на русском языкеgorenje bm 900 w инструкция на русском языке скачатьинструкция по установки евроручек на семеркуhitachi cmt 2198 инструкция по настройкеинструкция сотовый телефон j9000инструкция пду hr 230eмосква инструкция по применению оглавлениеwhirpool instrukcija

  13. #253
    Join Date
    May 2007
    Posts
    3,851
    Rep Power
    20
    In the interest of getting back to normal, I wanted to add that my Warlock has had a few problems I never encountered in all my years of boating, but hopefully everything is now fixed.
    1 - never had an engine that had to be rebuilt (replaced many before, but not because I had to do it).
    2 - never had an engine alignment problem
    3 - never had a Bravo hub spin out before
    4 - never had steering component problems before (my Donzi CC also had steering problems this year that are now corrected)
    5 - never had a boat that leaned so much, but hopefully the smaller diameter Rev 4 prop will solve that issue
    Even with the cost and time to do all the repairs on the Warlock, I am really glad we have the boat. Onwards.

    1971 Donzi 18' 2+3
    1985 Eliminator 23' Daytona Offshore - Kevlar hull
    1988 23' Donzi CC F-23 with 250HP EFI Mercury OB
    1989 28' Team Warlock Offshore - single 548CID/600HP
    1990 23' Warlock Offshore - single 525HP
    Bill from Denison, TX - Lake Texoma

  14. #254
    Join Date
    Sep 2005
    Posts
    5,802
    Rep Power
    0
    The twin to Bill's single. Same colors but a major project. Probably could get the hull for $1,000 as no one knows what they are. Most of the Team Warlock 28 Offshores were set up for twins. Singles were far fewer.
    Attached Images Attached Images
    1972 16 OB - C16B-63 - "Surface Tension" Resto Project
    1974 16 OB - DMR16106017-B - "The Mule"

  15. #255
    Join Date
    May 2007
    Posts
    3,851
    Rep Power
    20
    Quote Originally Posted by Greg Guimond View Post
    I ran across this original Team Warlock factory invoice for the little 23' Offshore model ................
    Greg, I never paid attention to the invoice for the 23' Warlock that I recently bought. Apparently Keith had sent it to you before I ever thought about buying the boat.

    Quote Originally Posted by Greg Guimond View Post
    The twin to Bill's single. Same colors but a major project. Probably could get the hull for $1,000 as no one knows what they are. Most of the Team Warlock 28 Offshores were set up for twins. Singles were far fewer.
    This would make a great project, but there are others out there that are ready to go for less than you could probably get this one completed.

    1971 Donzi 18' 2+3
    1985 Eliminator 23' Daytona Offshore - Kevlar hull
    1988 23' Donzi CC F-23 with 250HP EFI Mercury OB
    1989 28' Team Warlock Offshore - single 548CID/600HP
    1990 23' Warlock Offshore - single 525HP
    Bill from Denison, TX - Lake Texoma

Thread Information

Users Browsing this Thread

There are currently 2 users browsing this thread. (0 members and 2 guests)

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •