I would love to hear some real world opinions on this newer product.
I would love to hear some real world opinions on this newer product.
Cheers,
Pismo
1996 22 Classic
Red with Stainless Windshield
Stock Gen VI 502 Magnum MPI-415hp
Stock Bravo I
25" Mirage Plus
74.5mph best @ 5050rpm GPS (Speedo said 80)
27" Labbed Mirage Plus
75.5mph best @ 4800rpm GPS (Speedo said 82)
Pardon my ignorance, but, what is it?
George Carter
Central Florida
gcarter763@aol.com
http://kineticocentralfl.com/
“If you have to argue your science by using fraud, your science is not valid"
Professor Ian Plimer, Adilaide and Melbourne Universities
It is a thickened epoxy in a chalking gun tube that mixes as it is pushed out.
Cheers,
Pismo
1996 22 Classic
Red with Stainless Windshield
Stock Gen VI 502 Magnum MPI-415hp
Stock Bravo I
25" Mirage Plus
74.5mph best @ 5050rpm GPS (Speedo said 80)
27" Labbed Mirage Plus
75.5mph best @ 4800rpm GPS (Speedo said 82)
I was just reading about it last night. I think it would make a great epoxy mix for certain applications. I have used a MMM epoxy along the same lines which worked great on affixing a fiberglass front and rear end on my old 1980 Vette. It also had a long work time which was needed. Bill
1971 Donzi 18' 2+3
1985 Eliminator 23' Daytona Offshore - Kevlar hull
1988 23' Donzi CC F-23 with 250HP EFI Mercury OB
1989 28' Team Warlock Offshore - single 548CID/600HP
1990 23' Warlock Offshore - single 525HP
Bill from Denison, TX - Lake Texoma
I wonder mostly about its flexibility, usability and how well it binds. is it like a 5200 or is it much harder and the less flexible.
Cheers,
Pismo
1996 22 Classic
Red with Stainless Windshield
Stock Gen VI 502 Magnum MPI-415hp
Stock Bravo I
25" Mirage Plus
74.5mph best @ 5050rpm GPS (Speedo said 80)
27" Labbed Mirage Plus
75.5mph best @ 4800rpm GPS (Speedo said 82)
You can most likely get a better answer elsewhere, but here is what I read last night. Bill
http://www.jamestowndistributors.com...gn=email122211
1971 Donzi 18' 2+3
1985 Eliminator 23' Daytona Offshore - Kevlar hull
1988 23' Donzi CC F-23 with 250HP EFI Mercury OB
1989 28' Team Warlock Offshore - single 548CID/600HP
1990 23' Warlock Offshore - single 525HP
Bill from Denison, TX - Lake Texoma
There are currently 1 users browsing this thread. (0 members and 1 guests)