Anyone know how to duplicate the texture Donzi used on access hatch covers? I attached a pattern, from a access cover, that is similar. Not sure how it is done...........with a mold or ???
Thanks
Anyone know how to duplicate the texture Donzi used on access hatch covers? I attached a pattern, from a access cover, that is similar. Not sure how it is done...........with a mold or ???
Thanks
Try these folks http://www.masepoxies.com/How_To/Fle...irections.html
A real pain because the pattern is 1 sq ft and not cheap. But I had a good result on a 6" patch job.
You can also use a silicone putty/clay to spread over the old pattern, let cure, peal off and use
to texture the new surface. I have never tried this.
The easiest way is to sand off all of the old pattern and then add a new textured surface with
a textured roller. I have done this on swim platforms with good results.
'
Reality is something you rise above. Build yourself a life -- and live with it.
I wouldn't sweat it ... so an idiot thinks you're a dick ... not the end of the world.
Always live life as though you have something to learn and you will
[ QUOTE=$originalposter]{$pagetext}[/QUOTE]
That is what I needed..........but they sure are proud $$$ of their product. $55.00 for a 12" x 12" pattern. I think I will try making a pattern. As long as I get a good release, it should work. I believe the hobby / modeling stores have a gel of some sort that may work also. Roller is a good idea, but I want to match the pattern on other hatches.
Appreciate the help!
Put a rug down problem solved.
Aren't they generic parts? Like these: http://greatlakesskipper.com/categor...ss-covers.html
Lake St. Clair, Lake Huron, Lake Erie, Lake Oakland
I have a sample kit of just about EVERY non-skid out there but Boston Whaler. I will try and look it up before I head out to Sarasota tomorrow. The company sends it to you for free.
Nick
1994 22' Classic-454 B1 Red & white
1981 13' Whaler sport(original owner)
South Tampa Bay, FL "May I mamoo dogface to the banana patch?"
There are currently 1 users browsing this thread. (0 members and 1 guests)