I have a ford 351W for my donzi, where can I get the pulleys, I can not find them anywhere.
I have a ford 351W for my donzi, where can I get the pulleys, I can not find them anywhere.
Many ski boats use these engines, like PCM, for instance.
I can reccomend Michigan Motorz for many of these parts.
http://www.michiganmotorz.com/marine...s-c-32_76.html
George Carter
Central Florida
gcarter763@aol.com
http://kineticocentralfl.com/
“If you have to argue your science by using fraud, your science is not valid"
Professor Ian Plimer, Adilaide and Melbourne Universities
what vintage is the 351
as george said most skiboats use a pcm or indmar ford 351 setup
omc and volvo used a 351 setup also. to my knowledge these all use a pulley driven water pump mounted to the timing chain cover
the only issue would be if this is a older holman moody setup with their crank driven cross over water pump, this setup requires teeth on the inside of the pulley that mate to the teeth on the shaft of the water pump. this setup also requires a rubber star shaped damper that keeps the teeth from grinding together. the pulley on the h/m setup is a single pulley for the alt belt, the newer setups are three pulley or serpentine for water pump alt and power steering
When the sky is grey,look out to sea.
When the waves are high and the light is dying,
well raise a glass and think of me...
When I'm home again,
boys, I'll be buying!
My Ride
Come Join Us on The Queen Of American Lakes
Contact Us
www.lgdonziclassic.com
I have a never used (3) bolt HO crank pulley, still has Ford sticker but does have some rust from sitting around. PM me if you have a (3) bolt crank. Phil
No matter what your beliefs are "GOD BLESS AMERICA"
Fully retired marine tech near 60 years in the biz.
Thanks George, I will give them a shot.
There are currently 1 users browsing this thread. (0 members and 1 guests)