Results 1 to 7 of 7

Thread: 38zr speed?

  1. #1
    Join Date
    Jan 2006
    Posts
    160
    Rep Power
    19

    38zr speed?

    friend just bought a 2008 38zr brand new with staggered 525's. He got the impression it would do upper 80's, he took it out this weekend for maiden voyage and fought to get 81mph...any thoughts if this about right? thanks!

  2. #2
    Join Date
    Jun 2008
    Posts
    274
    Rep Power
    0
    I would guess that it probably will take a little seat time to get to get used to the right trim and tab settings to find the sweet spot.
    Donzi 18C
    Donzi 25 ZX "Full Tilt F/B "

  3. #3
    mrfixxall Guest

    Fixx

    First off ? Why is he trying to get full speed out of a boat he just bought?? Also tell him that if he blows one of the "new " engines merc will void the warr due to not properly braking in the engines..they can scan it and see how many hours at what rpms...tell him to get use to the boat first then try to max the boat out..we will also need more info like what rpms he is running,,tabs all the way up for max speed..

  4. #4
    Join Date
    May 2011
    Posts
    97
    Rep Power
    0
    How do you all feel about this break in method???

    http://www.mototuneusa.com/break_in_secrets.htm

  5. #5
    Join Date
    Jan 2004
    Posts
    1,101
    Rep Power
    22
    All of the 38ZR's w/525's run between 88 and 92 top end, depending on salt or fresh water. He may have too much tab down or not trimmed up enough. If she's broke in already, then 81 is too slow, he needs to play with her a little more. Good luck,

    tom
    2002 28ZX

  6. #6
    Join Date
    Jan 2006
    Posts
    160
    Rep Power
    19
    thanks for replies, i figured around 89mph was the norm also! Was hoping someone on here with the same boat could confirm! thanks again!

  7. #7
    Join Date
    Jul 2001
    Posts
    1,819
    Rep Power
    24
    A stock ZRC runs 93-94 mph so I would think the ZR would only be a few mph slower.

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •