Results 1 to 13 of 13

Thread: New Guy

  1. #1
    Join Date
    Jun 2011
    Posts
    4
    Rep Power
    0

    New Guy

    Hey everyone

    Happened to come across a late 70's early 80's 22' hornet I believe. It has a 351 crate engine. Owner does not have time to put project together. I am not too familiar with the Donzis but have always wanted one. He is asking 4500 for the package. The drive however is a volvo penta..should this raise any flags? I will try to get the HIN when i got back...boat is in great shape..

    Thanks for any help!

    Jim

  2. #2
    Join Date
    Feb 2007
    Posts
    4,015
    Rep Power
    22
    Welcome to the forum!

    Nothing to worry about with the Volvo drive. There are plenty of them out there still going strong. Props used to be a bit of an issue, but one of our former members worked wth Solus to develop a prop that almost everybody agrees works very well. Plenty of Volvo knowledge on the forum - I'm sure we can walk you through anything that might come up.
    Don
    '01 22 Classic, 502/B1
    And a bunch of other stuff

    "If everything seems under control, you're just not going fast enough" - Mario Andretti

  3. #3
    Join Date
    Jun 2011
    Posts
    4
    Rep Power
    0
    Zelatore-

    Thank you for the quick response! Are there any defining features to figure out what model/year the boat is bu just looking at it? I believe it to be late 70's, early 80's but it is tought to say..I just dont want to spend the money on something I will lose on right off the bat!

    Thanks!

  4. #4
    Join Date
    Apr 2010
    Posts
    65
    Rep Power
    0

    welcome Aboard.

    The Hin# will tell you The year the Boat was built.The Last 2 Digits.Regards Mike.

  5. #5
    Join Date
    Jul 2001
    Posts
    1,822
    Rep Power
    24

    Cool

    Welcome to the best Donzi forum on the net!

    Sounds like a good deal if that engine is still new. Should be very few problems with the completion. But for all your questions, you are in the correct place.

    As for identifying the boat, I'm not sure of the current new member limitations but posting pictures as a sure fire way of getting that ID. Plus we LOVE boat pictures here!

    Mark
    Florida SEADOG
    DONZI - You meet the nicest people.
    2006 22ZX 350 Mag MPi/Bravo One Donzi Quixote
    http://www.donzi.net/forums/showthread.php?t=44360

  6. #6
    GBond Guest
    Welcome...Nice boat. Consider a reputable surveyor even at stated price. Lot's of Volvo help here as well.

  7. #7
    Join Date
    Jun 2011
    Posts
    4
    Rep Power
    0
    Thanks for the responses everyone. I was able to get the hin off the boat. It is a 77 and not sure about anything else. The hin is listed below. Anyone have any details? Thanks!


    DMR211300177-GT

  8. #8
    Join Date
    Aug 2009
    Posts
    189
    Rep Power
    0
    Pictures and descriptions will be great.

  9. #9
    Join Date
    Jan 2003
    Posts
    9,571
    Rep Power
    32
    i'm not sure if the Ford / Volvo combo was available in '77, I thought matty said '76 was the last year, not to say it isn't a '76 leftover combo though..
    Charter Member - WAFNC, SBBR, KWOSG
    1955 Perfect Mate
    1986 Hornet III, 502-415 TRS

    www.donzi.org


  10. #10
    Join Date
    Jan 2003
    Posts
    9,571
    Rep Power
    32
    Quote Originally Posted by maritime1116 View Post
    Thanks for the responses everyone. I was able to get the hin off the boat. It is a 77 and not sure about anything else. The hin is listed below. Anyone have any details? Thanks!


    DMR21130D177-GT
    I think this HIN correction should be noted, should show to be a D instead of a zero, that would make it hull # 130, almost to the end of the run, so surely it had a Chevy at birth, not a 351 Ford...
    Charter Member - WAFNC, SBBR, KWOSG
    1955 Perfect Mate
    1986 Hornet III, 502-415 TRS

    www.donzi.org


  11. #11
    Join Date
    Jun 2011
    Posts
    4
    Rep Power
    0
    Thanks everyone for the replies!

    I took a nother look at it...it does in FACT have a new 350 with 1 hour on it...the seller was not too sure..I have been doing some research and the boat that I have been looking at has rails around the transom..i could not find one on the internet that matched...The owner is looking for 4500...does this seem resonable?

    Thanks

    Jim

  12. #12
    mrfixxall Guest

    Fixx

    Quote Originally Posted by maritime1116 View Post
    Thanks everyone for the replies!

    I took a nother look at it...it does in FACT have a new 350 with 1 hour on it...the seller was not too sure..I have been doing some research and the boat that I have been looking at has rails around the transom..i could not find one on the internet that matched...The owner is looking for 4500...does this seem resonable?

    Thanks

    Jim

    If its in good shape i would jump and jump quick at that price..Their are a few that have them on this board and have paid cloce to that price and had to put mucho money into them just to gert them in shape for the water..

    check out thease trend's

    http://www.donzi.net/forums/showthre...highlight=gt21

    http://www.donzi.net/forums/showthre...highlight=gt21

  13. #13
    Join Date
    Jul 2002
    Posts
    98
    Rep Power
    0
    Quote Originally Posted by BUIZILLA View Post
    i'm not sure if the Ford / Volvo combo was available in '77, I thought matty said '76 was the last year, not to say it isn't a '76 leftover combo though..
    Alot of times the motors in marine applications were a year older serial# then the hull. do not why but have found that to be common, especially in the 1960s thru late 70's boat i have been involved with.
    thescooter
    nick s

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •