Registered User
Ok, got some Keith Eckert exh manifolds. Bolted them up to my bbc and the tailpipes which are suposed to be std Bravo location are not lining up with my thu hull pipes. The KE's are about 2 inches too high.
Looking for some good suggestions as to how to get them to line up.
Lee
Registered User
I don't see any easy way to get them to line-up short of re-locating your transom exhaust flange/fittings.
How much space do you have between the transom fittings & your new K/E manifold outlets front to back?
"BENCHSEAT 18" ~~YellowJacket~~ project owner~
1929 Chris~Craft 28' Tripple Cockpit Mahogany Speedboat / A-120-A 845 Cu.In. 375 H.P. Chris~Craft V-8 racing engine.
24' American Skier
Super Eagle 454 HO Skiboat
1991 454 SS Chevy Super Sport Pick-up for towing my "Toys".
There is no such thing as going too fast ~ ~~
OR~ Being too old~ for a new "Toy"!
Brad Hunter
Huntingdon Valley Pa (Just outside Philly)~
Ocean City NJ
silverghost1926@msn.com
215 947 4676 (PA Home)
Registered User
only have about 3 inches between KE tailpipe and thru hulls.
Surely someone has had this same problem before.
Waiting,
Lee
Registered Lurker
I've heard of guys using wedge shaped spacers to get better alignment.
Maddy's Daddy
L.I.,N.Y.
Paid Subscriber
+1Originally Posted by maddad
Ken
Paid Subscriber
+2 May be available from Eckert!
No matter what your beliefs are "GOD BLESS AMERICA"
Fully retired marine tech near 60 years in the biz.
Call ke,,may need custom tails..
Paid Subscriber
The wedges are 95% cheaper than new tails.
No matter what your beliefs are "GOD BLESS AMERICA"
Fully retired marine tech near 60 years in the biz.
There are currently 1 users browsing this thread. (0 members and 1 guests)
Posting Permissions
Reply With Quote