After I got back from running pretty hard for about 3 hours I noticed my port trim limiter was hanging by the wires. Good news is everything seems to be working fine electrically.
Anybody know the screw and washer/clip size??
TIA
After I got back from running pretty hard for about 3 hours I noticed my port trim limiter was hanging by the wires. Good news is everything seems to be working fine electrically.
Anybody know the screw and washer/clip size??
TIA
“Never give in, never give in, never; never; never; never - in nothing, great or small, large or petty - never give in except to convictions of honor and good sense”
10/32 the little bent clips/washers are unique, should be able to gab the correct ones at a Merc dealer.
No matter what your beliefs are "GOD BLESS AMERICA"
Fully retired marine tech near 60 years in the biz.
Anybody know a good online source for Merc parts?
“Never give in, never give in, never; never; never; never - in nothing, great or small, large or petty - never give in except to convictions of honor and good sense”
http://www.marineexpressusa.com/
Had good luck with these guys.
Member - WAFNC
1997 22 Classic (sold)
1997 Formula 271 Fastech
502 Mag MPI
I've ordered quite a bit from this one www.ebasicpower.com
1999 16 Classic Black on White
To be honest with you, I usually google the part number and shop 5-10 sites and see who has the best price shipped.
B
Member - WAFNC
1997 22 Classic (sold)
1997 Formula 271 Fastech
502 Mag MPI
Just trying to find order the correct size screw. 10/32 per MOP
and locate the clip. Both mine are MIA.
Cant seem to find any place that sells the Trim Limiter that lists the screw and clips as parts
“Never give in, never give in, never; never; never; never - in nothing, great or small, large or petty - never give in except to convictions of honor and good sense”
http://www.mercruiserparts.com/mercruiser_parts.asp
1310-37978 SCREW, (#10-32 x .750), SWITCH AND SENDER TO GIMBAL RING (3/4 inch)$1.30
41413-26996 LOCKWASHER, (#10), SWITCH AND SENDER SCREW $0.60
41557008 RETAINER, SWITCH AND SENDER SCREW $1.90
machinist ,bore it deeper,ream it bigger, and lap it to a fine finish
https://www.facebook.com/photo.php?v...=2&theater
There are currently 1 users browsing this thread. (0 members and 1 guests)