Results 1 to 4 of 4

Thread: Mirage Plus Question

  1. #1
    Join Date
    Oct 2010
    Posts
    6
    Rep Power
    0

    Mirage Plus Question

    Getting ready to start my second season running a classic 18 on the West end of Lake Erie. 5.7 l Vortec (Moterz) attached to Alpha Drive. Ran a 23 P Solas prop up to 61.5 mph gps. Purchased an older Sold hub Mirage Plus (no venting holes). Installed the prop with the mercury thrust washer and had 1/8" of spline left for locking washer.
    Tried to install prop with out thrust washer and it seams to go in to far.
    The front of the prop has an offset of apox 1/4" and it looks like some kind of washer is required.
    Prop spins better with the thrust washer.

  2. #2
    Join Date
    Jul 2002
    Posts
    671
    Rep Power
    16
    Do yourself and the outdrive a favor, get rid of that prop w/ a solid hub. Alpha's need help when shifting, hence a rubber hub to take up the shock.

    There are props w/ removable flo-torque hubs that would be good. My 18 liked the Turbo1 prop.

  3. #3
    mrfixxall Guest

    Fixx

    what tm said! but if you insist on trying that prop youwill need this locking ring along with the lower prop washer installed..



  4. #4
    Join Date
    Jul 2001
    Posts
    14,574
    Rep Power
    32
    Another vote for dumping the solid hub, it will cost you a clutch dog set in short order nasty prop on any Alpha!
    No matter what your beliefs are "GOD BLESS AMERICA"

    Semi retired marine tech over 50 years in the biz.

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •