I decided I want to put in an oil cooler in the Minx.
I want to confirm that it is best to loop in after the satellite oil filter.
I decided I want to put in an oil cooler in the Minx.
I want to confirm that it is best to loop in after the satellite oil filter.
machinist ,bore it deeper,ream it bigger, and lap it to a fine finish
https://www.facebook.com/photo.php?v...=2&theater
Joe the cooler is the first thing to get cold water, should be right after the pump.
Phil
No matter what your beliefs are "GOD BLESS AMERICA"
Fully retired marine tech near 60 years in the biz.
On my setup, the oil leaves the block and gets filtered first(and it's temp read), then cooled and sent to the motor. I do it that way because the hot oil filters better and after the pumping it's as hot as it's going to get.
Maddy's Daddy
L.I.,N.Y.
Thanks Phil: oil cooler first on water side.
Thanks MD, Oil cooled after filter.
machinist ,bore it deeper,ream it bigger, and lap it to a fine finish
https://www.facebook.com/photo.php?v...=2&theater
There are currently 1 users browsing this thread. (0 members and 1 guests)