Looking for the best looking scoop for a Classic 22. Needs to be 3" taller than my stock hatch. Everyone says go with the Shelby one ..it's not a Shelby. Any suggestion ??
Looking for the best looking scoop for a Classic 22. Needs to be 3" taller than my stock hatch. Everyone says go with the Shelby one ..it's not a Shelby. Any suggestion ??
the Shelby Edition Donzi scoop is patterned after a late '60's Mopar design...
hardly a Shelby origination
so, go for it....
If you get your hands on a mold for one, Ill make you one for free. Since your so generous with the lifeline deal.....
Stan, check out my post on .org
I personally would use the 65-66 Shelby GT350R hood scoop. Or a 69-70 Boss 302 hood scoop. There is someone on this forum that used the 69-70 mustang hood scoop. I bet if you search "hood scoop" you will be able to find it and see what you think.
Never Kick a opossum at 40 mph!
I like the Teague one. http://teaguecustommarine.com//store...oducts_id=2781
Lake St. Clair, Lake Huron, Lake Erie, Lake Oakland
This is what we did to keep the stock hatch on my 20 cig
we used a Harwood and cut it down
Rick
Little Max
Run Hard Or Stay At The Dock
Very slick looks better than great!
No matter what your beliefs are "GOD BLESS AMERICA"
Fully retired marine tech near 60 years in the biz.
This is on my 18. Added screen during winter.
There are currently 1 users browsing this thread. (0 members and 1 guests)