Results 1 to 5 of 5

Thread: 275 LXC B3- Need help on the drive ratio

  1. #1
    Join Date
    Jan 2011
    Posts
    2
    Rep Power
    0

    275 LXC B3- Need help on the drive ratio

    I have a 1997 275 LXC 454 Bravo III, or should i say had a Bravo III. The outdrive was stolen and I am not sure what prop size or gear ratio the Bravo III was. If anyone could help me on this I would really be greatful.

    Thanks,

    pkndes

  2. #2
    Join Date
    May 2003
    Posts
    2,310
    Rep Power
    24
    You were probably running the 2:1 ratio. My guess is ,if you have a dealer with a good prop testing/exchange plan , try a 22" set first , 24 might be a bit much.

    Don't ding a set of test props ! !
    Just because something's old doesn't mean you throw it away !

  3. #3
    Join Date
    Jan 2006
    Posts
    4,215
    Rep Power
    23
    Just so you know a bravo 1 will bolt up and be a whole lot cheaper.

    It may or may not be worth it to you. My Dad and I did the swap on a 28 Formula (drives stolen) and it ran great with the B1's and we managed to get them for $500 each instead of paying thousands for each BIII.

    We went with 1.5 ratio B1 because they were common (i.e. the cheapest) and then backed into the prop size... 4 blade bravo 1 props.

  4. #4
    Join Date
    Jan 2011
    Posts
    2
    Rep Power
    0
    Thanks, I am going to put a Bravo 3 back on the boat. Does anyone know if the newer swept back style will bolt directly on?

    pkndes

  5. #5
    Join Date
    Nov 2003
    Posts
    12,683
    Rep Power
    34
    Quote Originally Posted by pkndes View Post
    Thanks, I am going to put a Bravo 3 back on the boat. Does anyone know if the newer swept back style will bolt directly on?

    pkndes
    It's my understanding all the mating flanges are the same.
    George Carter
    Central Florida
    gcarter763@aol.com
    http://kineticocentralfl.com/


    “If you have to argue your science by using fraud, your science is not valid"
    Professor Ian Plimer, Adilaide and Melbourne Universities

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •