Results 1 to 2 of 2

Thread: 22 classic drive cut out

  1. 12-17-2010, 04:29 PM #1
    Zinger
    Zinger is offline Paid Subscriber
    Join Date
    Sep 2002
    Posts
    294
    Rep Power
    22

    22 classic drive cut out

    Does anyone have the x dimension on a 98 22 classic. The transom is filled in and painted so I don't know were to get the measurements to place the mecruiser jig on. Can I just use a straight edge placed on the bottom of the boat and match it to the horizonal marks on the jig. If anyone can give some advice it would be great. Thanks Jeff
    Last edited by Zinger; 12-19-2010 at 12:47 PM. Reason: delete
  2. 12-17-2010, 06:10 PM #2
    MOP's Avatar
    MOP
    MOP is offline Paid Subscriber
    Join Date
    Jul 2001
    Posts
    14,603
    Rep Power
    38

    Lightbulb

    Being as it is filled consider raising it for much better performance, stock is 14-1/2 but that puts the cav plate too low. My 22 is just a tad shy of 17, it comes on plane as fast as any other and suffers no porpoising. You and I have talked enough to know you want the best performance you can get.

    Phil
    No matter what your beliefs are "GOD BLESS AMERICA"

    Fully retired marine tech near 60 years in the biz.
« Previous Thread | Next Thread »

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Forum Rules