Today was the first time out with the boat, small water leak around fitting on shaft going down to prop, had to tightend up. Lake was rough but the boat seemed to cut through very nice, no other problems will go out again when water is smoother.
Today was the first time out with the boat, small water leak around fitting on shaft going down to prop, had to tightend up. Lake was rough but the boat seemed to cut through very nice, no other problems will go out again when water is smoother.
Good job, saw your other posts. Looks like you saved a nice one.
Congrats! Great lookin' boat. Bet you're all smiles!
Good to see you got here out for a run. That Orange is just a cool color.. Jamie
How did that TH tranny work?
Check out You Tube for "Donzi 18 First Test Drive".
The slight water leak at the shaft is very important, you should have (1) drop every 30 seconds to keep the packing cool and lubricated. Also if you have the old graphite packing in there "RIP" it out and get the white packing, the graphite can cause electrolysis and pit the shaft where you will never get it to seal.
No matter what your beliefs are "GOD BLESS AMERICA"
Fully retired marine tech near 60 years in the biz.
looks like a smooth ride..
[media]http://www.youtube.com/watch?v=pInPk757gNM[/media]
There are currently 1 users browsing this thread. (0 members and 1 guests)