is there a way to run the cool lake water through the intercooler without drilling through the hull?
Registered User
is there a way to run the cool lake water through the intercooler without drilling through the hull?
Vintage member
Put a Tee into the 1 1/4" hose after it exits the seawater pump. Add a strainer before the seawater pump.
George Carter
Central Florida
gcarter763@aol.com
http://kineticocentralfl.com/
“If you have to argue your science by using fraud, your science is not valid"
Professor Ian Plimer, Adilaide and Melbourne Universities
if you want to remove your circulation pump and install a crossover drilled for intercoolers..i have a few procharger ones..Originally Posted by Tyler22classic
Paid Subscriber
Tyler---Read the installation manual. Now the water exit ---tne bildg pump exit with proper check valve or the exhaust tip. Me i run a separate gole for the trans cooler and inter cooler.
Randy owner of Donzis since 1966
High Performance props 3, 4, and 5 blade. Turbo and Stainless Steel props. Props for old Volvo drives.
The reason congressmen try so hard to get re-elected is that they would hate to have to make a living under the laws they've passed.
Registered User
Cheaters! Must be nice to have a blower! I wonder how a couple of turbos would be on these boats. I wonder if fuel usage would be the same as N/A motors at cruise.?.
Never Kick a opossum at 40 mph!
Wrinkled member
Turbos work great , better if you have FI
Same G.P.H. at cruise
I had a twin turbo 16 and a twin turbo Criterion...............Ed
Paid Subscriber
Look at my signature. I have been running this setup for 23 years.
"1978" F-22; Turbo'd & Intercooled.
Registered User
good idea. we ended up doing something similar to this.
There are currently 1 users browsing this thread. (0 members and 1 guests)
Posting Permissions
Reply With Quote