anybody have a prop shaft for a volvo 270 they might might want to give up in dire need part # 839385 Found out the hard way that 270 and 280 shafts are different
Thanks Ralph
Cell# 516-729-5896
anybody have a prop shaft for a volvo 270 they might might want to give up in dire need part # 839385 Found out the hard way that 270 and 280 shafts are different
Thanks Ralph
Cell# 516-729-5896
1971 Donzi 18' 2+3
1985 Eliminator 23' Daytona Offshore - Kevlar hull
1988 23' Donzi CC F-23 with 250HP EFI Mercury OB
1989 28' Team Warlock Offshore - single 548CID/600HP
1990 23' Warlock Offshore - single 525HP
Bill from Denison, TX - Lake Texoma
I believe I have one loose. I'll look for it in a bit and see if it has any numbers on it.
Frank
Triple Hatch.
It's a classic Donzi, not a Donzi Classic.
I have a 897320 that came out of either a 250 or 270 lower. I was told it was a 270 but can't prove it. You are welcome to try it or I can measure anything you need.
There is a 839385 on eBay.
Frank
Triple Hatch.
It's a classic Donzi, not a Donzi Classic.
I saw the one on e bay and bid on it but I am hoping I could rely on you guys to help out
thanks guys for your quick responces
Sorry, Ralph. The one I thought might be the one still has all the gears on it so I don't see a part number. Bill
1971 Donzi 18' 2+3
1985 Eliminator 23' Daytona Offshore - Kevlar hull
1988 23' Donzi CC F-23 with 250HP EFI Mercury OB
1989 28' Team Warlock Offshore - single 548CID/600HP
1990 23' Warlock Offshore - single 525HP
Bill from Denison, TX - Lake Texoma
The number on mine is stamped on the inside (forward) end of the shaft...
Frank
Triple Hatch.
It's a classic Donzi, not a Donzi Classic.
Yes the number is stamped on the side of the shaft it can be seen with the gears on
1971 Donzi 18' 2+3
1985 Eliminator 23' Daytona Offshore - Kevlar hull
1988 23' Donzi CC F-23 with 250HP EFI Mercury OB
1989 28' Team Warlock Offshore - single 548CID/600HP
1990 23' Warlock Offshore - single 525HP
Bill from Denison, TX - Lake Texoma
Ralph I have a 280 shaft on my 270, only hub for prop is different.
Randy owner of Donzis since 1966
High Performance props 3, 4, and 5 blade. Turbo and Stainless Steel props. Props for old Volvo drives.
The reason congressmen try so hard to get re-elected is that they would hate to have to make a living under the laws they've passed.
Getting old Ijust remembered I changed the gears on the 290 not the shaft SORRY.
Randy owner of Donzis since 1966
High Performance props 3, 4, and 5 blade. Turbo and Stainless Steel props. Props for old Volvo drives.
The reason congressmen try so hard to get re-elected is that they would hate to have to make a living under the laws they've passed.
There are currently 1 users browsing this thread. (0 members and 1 guests)