The gimbal bearing may be going or bad ON MY 16. I had the drive of and when I rotated the bearing with my fingers, it feels a little rough. I also just started Leaking a little oil into the bilge. I think they may be related.
Registered User
The gimbal bearing may be going or bad ON MY 16. I had the drive of and when I rotated the bearing with my fingers, it feels a little rough. I also just started Leaking a little oil into the bilge. I think they may be related.
Registered User
Change! No other way, it doesn't cost much for the alphas and is quiet easy to do, but don't know the price and effort for volvo AQsOriginally Posted by sctiberio
Registered User
This is an omc, virtually identical to the vovlo/penta. I'll replace the bearing, but i'm affraid that the oil is a bad rear crank seal.
Paid Subscriber
The input seal on the drive is another possibility, if the bellows is full of oil that is where to go!
No matter what your beliefs are "GOD BLESS AMERICA"
Fully retired marine tech near 60 years in the biz.
Registered User
If the seal is bad on the motor, the oil will be in the bilge.
Never Kick a opossum at 40 mph!
There are currently 1 users browsing this thread. (0 members and 1 guests)
Posting Permissions
Reply With Quote