Still poking around for good cleat options and found these three that are certainly a bit different. I also ordered the Wichard 6506 transom hardware which should be in next week.
Still poking around for good cleat options and found these three that are certainly a bit different. I also ordered the Wichard 6506 transom hardware which should be in next week.
1972 16 OB - C16B-63 - "Surface Tension" Resto Project
1974 16 OB - DMR16106017-B - "The Mule"
I also mocked up the three options for latches along with the "take apart" hinges stuck on a panel so I can eyeball one versus the other.
1972 16 OB - C16B-63 - "Surface Tension" Resto Project
1974 16 OB - DMR16106017-B - "The Mule"
Those X-cleats are bizarre. Interesting, but bizarre. The latches look good.
The fender stowage setup is pretty cool. FWIW, I think the reason the smaller pins have the same size tie-ring as the Cobalt pins is just because the tie-ring is sized based on being able to tie a certain size line through it easily. Even so, I agree they should be a little smaller.
"I don't have time to get into it, but he went through a lot." -Pulp Fiction
We made some progress last week toward getting a proper color match for the factory color "Yuma Yellow" which I like. There are several boats of the Yuma color, in various states of fade that I found. SanDogDewey was also good enough to send me a photo of his 16's non faded battery cover. Thanks!
I initially thought I had a dead on match but when Clint sent me the spray outs it was not a match. Very close to the Mini-Craft sample but no Cigar. Here is the sample. I want to preserve Yuma Yellow if I can.
I'm getting together a number of hull examples that had the Donzi Yuma Yellow gel color and will take another run at a match next week.
1972 16 OB - C16B-63 - "Surface Tension" Resto Project
1974 16 OB - DMR16106017-B - "The Mule"
I like the 1st and 2nd latches.....
Are the square color samples/coupons paint?
For some reason, paint has been tough to match to gel.
I have a lot of painted hardware on the TR, from two
different MFGRs, and none of it matches perfectly.
You just can't see the differences on different parts.
George Carter
Central Florida
gcarter763@aol.com
http://kineticocentralfl.com/
“If you have to argue your science by using fraud, your science is not valid"
Professor Ian Plimer, Adilaide and Melbourne Universities
Yes George, the round disc is polished Yuma Yellow gel coat while the two squares are paint. I changed my approach and now we are doing the entire top and cockpit in white gel but decided to paint the hull sides and bottom in Yuma Yellow. The boat pictured below isn't Yuma Yellow but it gives an idea. I don't think I'm going to do a boot stripe to make the look a little more old school.
1972 16 OB - C16B-63 - "Surface Tension" Resto Project
1974 16 OB - DMR16106017-B - "The Mule"
Hmmmmm.......I always considered boot stripes "REALLY" old school.
They've been around at least several hundred years.
George Carter
Central Florida
gcarter763@aol.com
http://kineticocentralfl.com/
“If you have to argue your science by using fraud, your science is not valid"
Professor Ian Plimer, Adilaide and Melbourne Universities
.
Several hundred years? Maybe for blow boaters! I guess it's subject to preference.
I'm not sure yet what I'll do but I'm thinking that a boot stripe disrupts the visual flow of a little 16 resto rod. But then again so does 80mph. I could also add it easily after the fact. So far I like solid.
.
1972 16 OB - C16B-63 - "Surface Tension" Resto Project
1974 16 OB - DMR16106017-B - "The Mule"
I gathered up a bunch of photos of Donzi's (including Sam's 14 Baby) that had "Yuma Yellow" to help us get a feel for the color. I wonder what Yuma was named after? Only Brownie probably knows.
Yuma is a bright yellow, which I like. When I spoke to Mini-Craft they had a hard time digging up the color. Ferro was the original supplier for "Yuma Yellow" back in the day. Unfortunately Ferro Gel Coats was sold to A. Schulman Inc. and all the records were lost in the sale. Of course even if you find a Yuma Yellow Donzi they are not exactly showroom new. Yellow probably fades just a touch better than Lucan Red.
.
1972 16 OB - C16B-63 - "Surface Tension" Resto Project
1974 16 OB - DMR16106017-B - "The Mule"
1971 Donzi 18' 2+3
1985 Eliminator 23' Daytona Offshore - Kevlar hull
1988 23' Donzi CC F-23 with 250HP EFI Mercury OB
1989 28' Team Warlock Offshore - single 548CID/600HP
1990 23' Warlock Offshore - single 525HP
Bill from Denison, TX - Lake Texoma
George Carter
Central Florida
gcarter763@aol.com
http://kineticocentralfl.com/
“If you have to argue your science by using fraud, your science is not valid"
Professor Ian Plimer, Adilaide and Melbourne Universities
I have far too many boats, just ask my Wife.
If you have something of great quality, and you take care of it, it will last forever.
Never Economise on Luxuries
Here is a great site for unusual hardware. I have purchased vents from them and they are first class.
Check it out. http://www.italianmarinesupply.com/
I have far too many boats, just ask my Wife.
If you have something of great quality, and you take care of it, it will last forever.
Never Economise on Luxuries
Bert, that is a cool site. Thanks for posting the link.
Here are your options for fender clips. Pay attention to the details as some look the same but are not. Also, the quality of the SS varies widely on each. The Seasmart products are very innovative. I know there "guy" in Italy if that is of interest to you. Actually as I post this, I bet your Italian hardware company can get that product.
http://www.seasmart.it/en/catalogo/prodotti+standard/1/1/24.aspx Italian Company. Metals are 316 and also Nitronic.
http://www.cpperformance.com/p-73986-stainless-steel-quick-release-pin-style-fender-cleats-516.aspx Livorsi clips
http://www.hardin-marine.com/p-25622-stainless-steel-heavy-duty-quick-release-pin-style-fender-cleats.aspx Hardin makes there own clips
http://tacomarine.com/item--Quick-Release-Fender-Lock--F16-0151-1.html Taco's clip looks like Cobalt but it is slightly smaller
http://www.captainsmarine.com/catalog_product_detail.asp?cat_7473-96163_product_1300342.Fender_Clip_Package.htm Cobalt pins, very high quality SS
1972 16 OB - C16B-63 - "Surface Tension" Resto Project
1974 16 OB - DMR16106017-B - "The Mule"
There are currently 2 users browsing this thread. (0 members and 2 guests)