Here'sonehullprotectorthatIfoundthatgoesaroundtheb oweye.I'll keep looking and see what else I come up with. I may try to make my own.
https://www.gator-guards.com/bowshield-bow-guard/
Here'sonehullprotectorthatIfoundthatgoesaroundtheb oweye.I'll keep looking and see what else I come up with. I may try to make my own.
https://www.gator-guards.com/bowshield-bow-guard/
'07 22 Classic Shelby GT
'96 18 Classic - sold
'69 16 Ski & Sport - sold
Thanks Chip. I saw those also, but have to agree with Carl.
The one Greg has, has a bit of style to it.
Why is faster never fast enough.
I agree. I think that I'll probably make one before I buy something like that. It looks pretty thin as well at 22 g stainless. I found some other close up pictures of these installed and it would be an insult to a Classic to put one on.
'07 22 Classic Shelby GT
'96 18 Classic - sold
'69 16 Ski & Sport - sold
You could do an old school cutwater!
Sean Conroy,
1964 Formula Jr. (hull #2) project
1972 Greavette Sunflash III
1981 Kavalk Mistral project
"A man can accomplish anything... as long as he doesn't care who gets the credit."
Sure! I'm trying to picture it on a Donzi Classic but I can't quite make it work.
'07 22 Classic Shelby GT
'96 18 Classic - sold
'69 16 Ski & Sport - sold
Hi Greg,
Thank you for your thread and all the great information it had.
I wanted to ask you if you can give us the latest specs of the final pad design :
- Width at transom
- Notch at transom : yes/no
- Pad Total Length
- Pad deadrise angle after the flat area
- Pad width at the end (bow side) if not 0
- any rocker added to the pad ?
- pad is blueprinted sharp ?
And lastly , i have some questions about your lift strakes, when looking at your pics (http://www.donzi.net/forums/attachme...4&d=1421530974) for the two lift strakes that get to the transom , it seems that the lift strakes height transom side is not as high as in the middle of the hull or your bottom hull transom side has some slight rocker from transom to bow that make the lift strakes height seems smaller. is this true ? or just light and shadow effects ? if true , is it your mod or original donzi hull shape ?
PS: Did you get "surface tension" on the water yet ?
Thank you .
Warm thanks from Tahiti.
There are currently 1 users browsing this thread. (0 members and 1 guests)