Quote Originally Posted by epatti1062 View Post
To it out today for trial run WOW. I a few problems exhaust rise getting hotter than the other pulled the hose off the theromastat housing ran water hose to it flows great. Please help Tim
Usually you'll find it to be a stuck poppet ball causing one riser to run hot, its an easy fix just remove the two top hoses from the thermostat housing going to the risers and check the two spring loaded poppet balls. If they're found to be visually stuck you can disassemble them from the threaded connector and turn the balls around so that you are now using the other side of the ball that is still new or just sand the wear groove down smoothly so it doesn't stick. If either of the two suggestions have already been performed then just replace them with a new set.