I have a few of those in my yard. Just don't go to close and don't feed them and keep your dog away from the water .
Type: Posts; User: Richard McCoy; Keyword(s):
I have a few of those in my yard. Just don't go to close and don't feed them and keep your dog away from the water .
Round speakers are better because you can use a large hole saw cutting backwards to make the holes. Inside space under the rear seat is going to be a problem unless you are willing to cut the storage...
I took out my 3000 watt system. Installed 4 6" Marine Bose's. The big system kept draining the batteries. You need 2 awg cables. The plate to the left has the boose gauge and fuel pressure gauge also...
On the west bank?
New Orleans ,East Bank, West bank ,Up town ,down town, Mid city,Lake view, 9th ward and lots of others have their own slang and we have no problem knowing what they are talking about. Sidewalk=...
Is this a salt water event?
Drill the holes to protect the boat. Check were everyone else installed their's.
75 ? Paw paw that was to slow
The 22ZX comes with a 1200 GPH Attwood I added a 1500 GPH Rule about 8" above the factory pump than installed the 1 1/8"discharge on the other side of the boat.
and faster and faster it will go.http://www.donzi.net/ubb/biggrin.gif
About a year ago my grand children said paw paw your boat is to slow I said I can fix that. It only takes a little money and a little money and a little money and so on and so...
Nice Prop. Now protect it by installing a unpainted zinc hub nut and paint the outdrive with two coats of zinc phosphate primer to prevent the lost of your outdrive to salt water damage. Remove the...
When you buy a boat it becomes a hole in the water that does not have a bottom and it will take all the money that you can throw in it. The idea is to limit the amount of the same items you buy over...
Accon Marine has S.S Pop up chocks and Donzi Stock Pop up cleats. S.S.Pop up bow lights. 1 727 572 9202. www.acconmarine.com
For Mercury engine parts go to Mercury Parts express on the web. Have your Ser.# for the motor and outdrive and zip #. This site will have a parts breakdown for almost all Mercury products.
Cut the sharp edges off of the trailer bunk brackets and U bolt brackets. Don't power the boat on the trailer looks like you missed. The hardest and longest way most of the time is the shortest way.
How about WD40? Spray it on let it set wipe it off.
Watch the tilex on the stitches could discolor them and worst cause rot. Tide works well.
Thanks guys; I wanted to know before I drilled a hole for the intercooler discharge. I seen on one post a while back that someone used the sea water pump to supply cooling for the drive. I though...
Does anyone know the temp. of the water discharged from a Procharger AW 324 intercooler using 7# of boost? I would like to use the water to cool the drive by tubing it to a drive shower.
The Last Numbers Are The Hub Code I Think.
Is there any room under the bow mats in the cabin to install a door and a box? I don't want to cut a hole if it is filled with something. There is some room behind the rear plywood cabin panel (the...
1" strap with snaps. If the ladder comes down when running it will damage the out drive. West has the parts to make a new strap. The bottom rung of the ladder has a snap button in the left corner or...
Vent in bow is that the horn? Only has a small wire hole under bow light you need to take the light off to change the bulb. The rear vents are made by ITC INC. 4" item # 81931. Heat rises. One or two...
Were can one buy a scanning tool for Mercruiser efi motors?