If you take a look at the picture, the trim tab pump on the left was produced by Hynautic.....I think this pump was originally developed for some models of outboards.
Anyway, it uses the old style...
Type: Posts; User: gcarter; Keyword(s):
If you take a look at the picture, the trim tab pump on the left was produced by Hynautic.....I think this pump was originally developed for some models of outboards.
Anyway, it uses the old style...
Here's another option, although you'll probably never find another set.
These were made by Hynautic in the early '90's for just a few years.
I've been told they were very expensive.
Anyway, to...
It would seem with the number of glass boat constructors in GB, that with some diligence, someone working in one of those facilities could be found.
Good luck.
Mini Craft is about 15 miles from my...
Any good glass shop can match any color gel.
Gel fades a lot over the years and it takes a pro to do a good match job.
Just do some local shopping, particularly if you want to do less than a whole...
Sorry I haven't looked at this thread for awhile. The project looks great.
The water from the drive could be used for an intercooler, otherwise, just remove the transom hose. You'll find the drive...
Not many can be repaired. Might want to shop for a new speedo, or make a complete changeover.
The last time I checked, the Coasties only allows very small tanks (max 10 gal) made from seamless tubing and formed parabolic welded ends.
Kinda pointless.......
The Canucks allow them though.
All ya gotta do here is dodge the alligators........It's plenty warm.
FWIW, the TR has the thinner transom sides. While I was reinforcing the hull, I added
3 additional courses of stitchmat to the sides. I can't tell you how much stronger the
sides are.
When I put...
We rented a house also as we found the accommodations at a couple of marinas
were less than we hoped for.
Matty, notice in my picture, the pulley has three grooves.
It no longer does because I had no need for he third groove
But cutting it off made it a lot easier to remove tthe pump.
I like the idea of electric steering. There's a large number of
cars w/electric hydraulic pumps. I'm not talking about electrically
operated steering racks, but electric pumps.
Also, a local...
Matty, I did it the hard way!
I ran a separate line from the ignition switch w/a 15 amp fuse (I think).
Sorry you're having problems Matty.
This is the pump I've run on two different boats:
...
Donzi's 22's built after '93 were generally better constructed than earlier
boats. Most (but not all) boats built during the '70's and '80's have some
frequent problems w/cracked cockpit floors...
To me, the question would be, could whatever have caused the engine to seize
have affected the hull also?
I don't have a lot of confidence in Donzi's from that period. Even if the hull is sound, ...
An excellent '87 in really good original condition w/low hours engine and Alpha drive
would probably be worth $8-12K. W/o an engine and all the other things that happen
to these boats when NOT...
I've recently read a number of articles about seemingly valuable vehicles
that have a price that's too good to be true. Usually the reasons are
divorce, business losses, etc. The thing that's...
There's a local upholsterer near my business who does excellent hot rod
upholstery work, but he only works when he wants to. He helped me w/my
old original seats and explained the curves are...
Glen and Bobbi have been to our house......it's a heck of a long way for them to visit Florida!
My tank wa epoxied by the MFGR for $50.00. They initiated the question.
I was impressed.
The MFGR was Best Fab http://bestfab.com/ located abouut 50 miles
south of me in Bartow, FL.
I've noticed that in my 120+ page thread on my 22C Testa Rossa has lost
virtually all its pictures after page 7.
http://www.donzi.net/forums/showthread.php?50476-Now-I-m-getting-serious
I suppose...
And don't forget that fuel tank.
Low speed is a relative term. These are good to ,I would guess, at least 100 MPH.
The bottom inlet angle can be ground to a flatter angle if pressure gets too high.
I have a pressure gauge on the...
Stainless Marine makes some very nice transom pickups. You can remove the pump impeller out of your
Alpha, along with the hose connecting the drive and gimbal. You also need to block the water...