Looks GREAT!
Type: Posts; User: SamIam; Keyword(s):
Looks GREAT!
WOW...looks great.
Very nice.
I will let you know.
Putting a SS on a Gen II Alpha - 20' Baja Outlaw w/470 hp Dart 406....
I agree, you should just need the bellhousing to bolt to what you have.
The one intermediate that I posted a picture of, will work with a Y-pipe. Came from a 280 set-up with a Y-pipe.
Is this it?
What style of intermediate do you have?
Can you post a picture of it?
Sam
The motors are in a 38' Fountain
The assembly lube that Aeroquipe or Earl's sells is another good item to use when assembling the hoses.
These also help.
http://www.summitracing.com/parts/aer-fcm3661.
They are Aeroquipe vice blocks for holding the fittings.
The Cobra looks great!
You need to buy the "Braided hose" cutting tool. http://www.summitracing.com/parts/sum-900040.
I used to use a die grinder w/carbide wheel - the snap-on thin ones with tape. Bought the cutting tool....
I had mine out this Sat. Full tank of fuel, nice chop...Just tickled 50 on the dreammeter...uhmm speedometer.
Mine has a stock 140 Mercruiser in it w/Sst Merc prop.
Very cool!!
I can help with the mechanical stuff...
Main differences are the cam, carb jetting, timing and rpm.
The main factor that you MUST address is what drive are you running behind it.
The Bravo 357 WILL NOT have the shift interupter programed...
Awesome....
1 Baby Donzi...1 Baby Cigarette...
Very Cool!!!
Looks like FUN!
Awesome little boat.
Hope mine will turn out half as nice as Bert's!!
How about a NOS motor instead?
Rob, check your pm's
Once a mechanic is 'Certified' they have to take a required amount of "update" courses to keep the certification. The certification lasts for 2 years.
Rob,
I will check mine tonight.
PM me, I have info/phone # on a NOS Mercruiser Renualt motor-complete.
PM open...
Thanks.
Thanks!:)
I was crawling around under the deck of my Baby 14 looking for hull numbers? lettering? etc.
I found 14-B-13 writen on the back of the dash on the port side.
Is this hull #13?
Awesome...
Most installations of B1/B2 drives have the placement of the spacer in FRONT of pin. B3's have the spacer BEHIND the pin.
You need to put the 'spacer' BEHIND the pin, if you want to limit the amount...
I will do that.
Thanks.