I won it Carl. Just focus on getting better and hopefully I'll have another Donzi soon and you can come to FL for a run with us
Type: Posts; User: VetteLT193; Keyword(s):
I won it Carl. Just focus on getting better and hopefully I'll have another Donzi soon and you can come to FL for a run with us
I think the mirage was available with a solid hub but i thought M+ were all inserted hub props (all the ones I had were). There is also no real reason to run a solid hub on a classic unless you are...
Sounds like you spun the hub, or partially spun it. I'd check the prop hub to see if it is damaged
Anyone know if someone took over what donzidirect was doing? Looking for zr parts, factory was no help
Answer is 1) hard to find these days and 2) size depends on ratio of the drive
Was looking for my old boat and found this one... unless I'm seeing something wrong they built at least 168! https://www.bigthundermarine.com/inv/1988-DONZI-20-MINX-Lake-Ozark-MO-003656/#mainpic
Before you tear into it I'd still highly suggest inspecting the bellows and the intake hose. If you see any cracking starting on the hose or any minor tears or drying out of the bellows it's time to...
It is MORE critical. The Alpha pump is tiny relative to the Bravo pump. It is also, unfortunately, a total pain in the ass to service. You should also check the bellows and look there too because...
absolutely. Assuming you have a Bravo it's hanging on the front of the engine, bottom left side. pull the whole pump and do the service on your work bench because it's a pain in the ass getting the...
The raw water impeller is a 3 year part. As in, change every 3 seasons. So even if it was done right before you bought it you are about 7 or 8 years overdue. It is also a part that is 100 times...
I know this thread is a bit old but the boat is still for sale. I'd think that the 525 wasn't factory because the boat has no options other than the hull side gel which I think was a freebie option....
I was seeing 180 on factory 6.2 MPI's. Merc raised the temps in recent years over the older stuff. After a full engine out service my engine guy lowered the stats and now it runs 165 ish.
I'd...
I didn't see any updates on this so I guess it's time to let everyone know... George passed away Jan. 18, 2019. He will be missed by all of us.
I wouldn't mind putting a switch on the auto retract to enable/disable it. When I'm out boating all day I kinda want it off but at the end of the day it's nice.
I have power to both ignitions, stereo, drive trim, and the captain's call (which is tied to the starboard engine key).
I have no power to any other switch so I know it isn't a bad switch. ...
Anyone have a wiring diagram for a 28ZX?
I was working on my overheating issue and suddenly lost power to the dash. I have power to both engines, both drives, radio, and the captain's call...
It wasn't doing it before, I had a sensor issue but otherwise it ran fine.
Boat is a 2008. Factory exhaust. Salt water, flushed with saltaway, bravo. Has silent choice.
I'm leaning towards...
i have twin 6.2 mpi mercs. I had not used it for about a year, there was a sensor issue and life got in the way. I just serviced the boat to get going again... oil, drive oil, raw water pumps, etc....
I've spent more than enough time in a 22 with dry exhaust. It's fun if you don't like people at all. Plan on having zero conversations while in or around the running boat. There is no platform to...
The xr gear set is available for it. Merc will pair the 520 with the bravo 3 xr and will pair the bravo1 xr with the 600 from the factory.
I remember reading a few years back that a company would...
Is it the old 525sc setup? With a 502 and stock merc boost I'd think it would be around 550hp. I assume they dumped the fuel injection and it has a carb? Hatch is cut? The old 525sc was reliable....
I got one from a guy on eBay. He uses a drum kit mount/clamp. It's not good for salt use. all he uses is a sportbrella which works fine though. It's pretty effective and since the sportbrella has...
research mercruiser mpi "cool fuel" system.
The aeration tube, from a logical perspective, will do very little when shifting. It may let you set idle down a tad because the props may get to moving a bit faster but minimal I'd think.
It...
If this is agreed value it's cheaper than mine. I'm insured about the same as your appraisal numbers, agreed value, with Progressive through USAA and it's about a grand per year on the ZXO. No...