Search:

I'm going to make this my winter project, I'm sure I can find a motor and if I have to will use the sprocket off the old motor. The plastic is in rough shape as well but I might be able to fabricate...

Has anyone ever replaced one? Ours is pretty shot, on a 1984 18' Classic. Recently stopped working, replaced 3 position switch but motor doesn't want to go in up direction. Spot light still works...

Thanks for the information, I had a Bravo 4 Blade on my 26 zx and loved it. I will have to see if I can pickup a Revolution used somewhere.

What pitch did you end up liking for the Rev 4, I tried to go back and look through the responses but didn't see it. Have a 18' classic with 300hp small block and have always had the 3 blade cleaver...

2000 Donzi 26 ZX

***MUST SEE!!!***

$32,000 or Best Offer, Please email jslahtosky56@gmail.com or call cell 860-778-5086 Cell. I have a bunch of pics I can send.

This 2000 Donzi 26 ZX is...

I need some help, I have a donzi with a Brazilian Manifold adapter that is used in conjunction with my WPM external steering. It started to leak so last season I purchased a new Adapter but it still...

Scott,
Sure looks like they do nice work, good luck on getting it done. I will try to post some of the pictures of the 14, I believe I uploaded a few way back when to the web site. If I remember...

Greg,
I grew up in West Hartford, CT. I was good friends with the original owner who had a cottage down on Niantic Bay. We used the boat primarily on the CT River and Niantic bay area with some...

I believe its hull #3 or 4, I could ask my buddy who use to own it. I drove this boat for many years, what a blast it was to ride in. The glass work was done right down the street from where I live.

I might not be the norm since I still like my music and once in a while like to hear it even when going wide open. I have 26ZX and installed a 1000 watt Fosgate amp with (2) 10" Marine Clarion subs...

The pictures came from me, 2 were when we had it on Lake Champlain and the other was on the Ct River. I had a good friend that owned the boat and I got to use it once in a while.

[ QUOTE=$originalposter]{$pagetext}[/QUOTE]

If I knew where it came from I could confirm if its the same boat, has the 45 degree foot rest been cut out? Are their boards fiber glassed in on the...

Sure do, I had this same problem and it took me a little while to figure it out. When they drilled the drain hole for the Anchor locker they drilled it a little to low so it acutally cuts into the...

Mine had the larger one so the pump came right out. Since the pump is on a little platform it doesnt get out all the water so I some times just use a shop vac. It seems like if their is any water...

I have a 2000 26ZX and I have either replaced my ignition once or twice, one time it would just keep spinning around. Its fairly easy to replace but I'm not sure if you matching keys. I just pulled...

I have a 26zx and I get this all the time. The drains in the floor as well as the Glove box and I think the storage under the rear seat drain to the front bilge. I washed my floor this year before...

I have a 2000 26ZX and have delt with many of these issues so I will try to explain. I hope I can explain it so everyone understands it.

Storage Anchor: I had a problem with this leaking and it...

Is this 26P Labbed?

I have installed the Revolution on my 502, it went pretty smooth and the only thing you will have move is the Oil Reservoir for the stern drive. I'm not sure if it was extra but I got all the...

I have a 2000 26ZX and I bet the take the same cables which I replaced 2 years ago.

I have a few different part numbers so I will give you what I have.

I show them to be Teleflex 633 Series...

I have a 2000 26ZX and have the same issue. Water typically seeps through the bottom step gets the carpet wet. The pump works on a float system and does not have a switch, I replaced mine since it...

I have had seatow for 5 yrs and only used them twice. The second time was just yesterday since the Bearing went on my Serpentine Belt Tensioner, it ended up in the bottom of the bilge so we lost...

Thanks,
We really like the graphics too, when we were searching for a ZX I wasn't really paying attention to the graphics but once I say a pic of my boat that was it. I think it add's a little...

I will take a closer look at my boat this weekend but I believe the graphics are gel coat and not any type of graphic sticker. Here is a picture of my 26 ZX.

I have a 2001 26ZX with a 502. It came with a 3 Blade Mirage prop and I hated it since it blew out all the time when taking corners and I'm not talking about sharp turns. I went with a Bravo 24P...