Knocked the dust off "Genuine Risk"
"The Boss" and I will be there at least Thursday:cool!:
Weather looks GREAT
Norris Is FULL!
BTW:
This is a local lake for us;
Small lake/ narrow...
Type: Posts; User: RickR; Keyword(s):
Knocked the dust off "Genuine Risk"
"The Boss" and I will be there at least Thursday:cool!:
Weather looks GREAT
Norris Is FULL!
BTW:
This is a local lake for us;
Small lake/ narrow...
My 1995 22C pump was located below the rear corner of the hatch :bonk: Water would leak into the small hole on the cap of the resevoir when the hatch trough overflowed.
Relocated the pump and no...
I drove the boat once at moderate speed. It felt like it was on rails.
Some board members still know where the boat is but I guess it is top secret :eek:
I was looking through some old pics and found this one of GEOO.
BEST DONZI PIC EVER!
+1 Mattyboy
I used backing plates on the pop ups. 3/8 plywood coated with epoxy, beveled edges and rounded corners.
Todd
I has been forever:frown: "The Boss" and I have been working on a couple FUN projects. Got them completed, now it is time to get the 22 dialed in :)
Mabe we can make AOTH next year. Are you...
miike
Please email me
riggerb@aol.com
Rickr
22 Classic, 502, Bravo
Currently running a Turbo 1 25P in fair condition, 5600RPMs w/12% slip, 2 people, full tank. I also have a 24P Turbo 1 and a Mirage Plus 23P.
I have what I would call "Stock"...
I like the darker acrylic also.
On the earlier 22C, the stainless windshield frame comes apart. A lot less work:yes:
The screw holes on my 1995 22C were not chamfered causing some gel coat...
People say I'm a little "Anal":cool: BUT
On BBC Retangular port heads/Gil I use
Felpro 1410
Hylomar sealant
Stagered, 15#,20#s,25#s then final 30#s, go through a heat cycle then 30#s again
Speak with Bob
http://www.marinekineticsonline.com/
There is a wealth of info here
uscomposites.com
And here
http://www.boatdesign.net/forums/fiberglass-composite-boat-building/
Vette
Engine has never overheated.
fixxall
Why would #8 run lean? Dart Intake?
Hedge
I'm going w/Inconels.
This is #8. I had my heads mixed up, DUH.
I am leaning toward a manufacturing defect.
Piston top looks fine.
No problem with the seat or valve face.
I assume all the valve guides go...
Piston, Cylinder, Plug, Intake valve, Head all look normal. Most of the exhaust valves leaked during a leak down test.
GM 2 piece stainless valves, top half of stem is magnitic lower damaged half...
HP 500 Clone
9.1/1
MSD
Gil Offshore
Decided to spring for the Inconel Valves in the Dart Pro 1 heads I am having assembled BEFORE I discovered the failing stem on #8.:shocking:
OEM...
Looking for
1'x4" new or used/ polished or raw stainless exhaust tubing
1'x3.5" new or used/ polished or raw staiinless exhaust tubing
around 15"x4" VHT Blue Silicone exhaust hose.
Time got off on mine and would not accuire. That would cause an error.
I don't remember how I reset it :(
Buz
I have not found notice any discoloration on the dipstick or when changing oil but when looking in the oil fill on the valve cover there has been condensation (brown oil/ moisture). I do not...
Thanks for the suggestions but there is no room for a thermostat due to mounting the cooler under the port exhaust on the 22 Classic.
Condensation is normally not a problem, but because of some back...
All you girls that need a swim platform or ladder to get in your Classic, take a lesson from my mother.
We flew her down to FLA/USA to celibrate her 80th birthday. She didn't have a problem using...
After installing a larger oil cooler I am having trouble getting the oil up to temp to burn off moisture. Getting some condensation in the valve covers (no water in oil).
I am holding 11#s. Is...
I pull our 22C with a 3/4 ton diesel with Load Range E tires. Trailer is a Rolls rated at 6000#s so it is very stiff for a 22C.
After a trailer tire failure (Maxxis radial trailer tires) which...
I am going to try a Holley 4150 (9381/830CFM) on my HP500 clone.
The 9381 has no choke, annular discharge nozzels, 4 corner idle.
The Holley 800 HP500 carb I am taking off has staggered jets...
Putting "The Other Boat" in the barn this winter. Any ideas on how to keep the mice out??????
Moth Balls?
Flashing?
THANKS!