Here's my solution. The stock pedestals were to high and I didn't want to cut the Garlick swivel/slides.
So I cut the tops off the pedestals to the correct height. Make up a some slabs of 1/4"...
Type: Posts; User: justleft; Keyword(s):
Here's my solution. The stock pedestals were to high and I didn't want to cut the Garlick swivel/slides.
So I cut the tops off the pedestals to the correct height. Make up a some slabs of 1/4"...
BoatNut had or has a '97 for $22K.
Looks great.
Anyone know the build ?
It just hard to tell that crazy line. Many women practice being reasonable.
Yea, after my 1st wife (8 on the hot) found out that I had a 1/4 mil $ dismemberment policy
tried to cut off 2 of my...
$99 ! Hey, maybe $30. Unless I could actually title a car with this plate. Still $ 99
Wow, $40K for a SBC, alum prop, basic tabs and an orange peeled repaint.
But it does look nice in the pictures.
If it is an "add-on" ext dual hydraulic ram steering. Then the new rams connect to the valve that controls the current internal
cylinder. It will be a Saginaw or Brazil valve. You need to know...
The rear bottom cushion looks like it could be climbing in and kneeling to open hatch (turn on battery switch in my case).
Or suspect the suntan lotion of the girl who wears the thong and sits in...
Ms. Bad Dog
NoNo Bad Dog
or my favorite: Bitch
Had a friend with a big German Shepard named Bitch. It was a gas to watch peoples
reactions when he let this dog out in public !
Get...
Wow ! Custom Trailer $620 :hyper:
78550
Happy Birthday
I had to rearrange my garage so the 22c got to go outside. 1st time in 3 yrs. This was around Halloween.
The lighting and Droid pic makes it look sinister. Next, wet sand the stbd side. The...
I can see no way to run a drive shaft so.....
raw water pickup/trim tab/rudder for a v-drive or inboard ?
I can see how it would work with twins. Maybe run 2, one behind each prop.
I have used Fibre Glast (Ohio ?) http://www.fibreglast.com/
They have some good DIY videos
Senior Discount !!!! Beer & Wine 5% off on Thursday :drinkbeer:
Back when I was thinking about building a plane there was a 4 seat version of Burt Rutan's Long EZ
that had a SBC in the rear. Amazing performance ! I don't remember who made the kit.
With the...
Nice ! Too early for Burning Man :cool!:
A friend asked me if I could check the coolant gauge/sender on his DeTomaso Pantera ( the gauge is notoriously wrong).
When we found the right sender the gauge is right on the nuts.
So I decided...
That wet exhaust is going to make a mess of the wall !
Sweet ! But needs a big blower !!!!!!
A little hyper-activity wouldn't be bad thing. Maybe I'll something done :hyper:.
Plan to smoke a few pounds on Sunday, the 12 -13 hrs will kill off most of the bacteria :tongue: .
I'll let...
I pulled the plexiglass windshield (with eyebrows) off of my '86 22c. It was really scratched and 1 side was cracking.
It seems someone pulled this one off and replaced the port side piece. Then...
1 of the nice things about the Press-N-Snap is that it presses the snap straight together w/ allot of leverage.
This allows you to use commercial SS self-piercing snaps. But I usually stuck an awl...
PNS-1 Press-N-Snap Tool $112. Come with all the dies you need. You may be able to find cheaper. I have used this
baby for a couple yrs now. I can't imagine trying to do boat carpet or HD...
Yea, I met Dontain ! Don't go there !!
How about Bahazitain , or Founzi, or Dontain