yes the I on the reg goes to ing on. this is how mine is wired. matty please pm me. thank you. http://www.junkyardgenius.com/charging/ford02.htm
Type: Posts; User: bzsmarina; Keyword(s):
yes the I on the reg goes to ing on. this is how mine is wired. matty please pm me. thank you. http://www.junkyardgenius.com/charging/ford02.htm
Outer is up, Inner down. Transome sheild will be sent monday. ...
i have a custom made spinelli stainless rt hand 14 1/2 by 21 for volvo aq drives. 350.00 plus the ride. http://www.donzi.net/forums/attachment.php?attachmentid=64041&stc=1&thumb=1&d=1306878004...
here are a few pictures. and its a 14 1/2 by 21.
i have a custom made spinelli stainless rt hand 14 1/4 by 21 for volvo aq drives. if you would like to try it. i payed spinelli 1000.00 to make it. now i repowerd and i do not need it. i will sell it...
looking for drew marine sidewinder stabilizers. used or new. please let me know if anyone has any laying around thay want to get rid of. thanks
matty it will be sent by the end of next week. as for hi-jacking the thread, all i did was offer a prop. thats all. if thay wanted to try it or not. thats it.... yes i turn mine rt but it works for...
WTF!!!!!!! i just took it off the boat last year!!! i told you i needed bunch of parts for the 280t and went thru hard times. sorry man soon as i took it off i been trying to give it to you. took it...
i also have port side helm. i found that spinning everything left, motor and drive with left helm, the boat laid on the left side. i spun the drive right problem was gone. just what worked for me....
mighty demon 750
i have a very nice stainless custom spinelli 3 blade 14 1/4 by 21 rt hand i am selling for 350.00. should be great for you. let me know ill send you pictures.
awesome!!! looks great!
roger waters is still touring over seas. he has a web site. he was pink floyd.
is 95 out of the question?
yeah, i have done everything i could on my car and the boat. done the transom shield, bell housings, mid shaft housing, ect, even took apart the rams for the trim to do them. but i did not do the...
i have never had a problem. i do the heads and jugs for Harley`s. long as the coater tapes off the mating surface, and plugs all bolt holes. just have to find a coater who cares.
also if you put auto clear on it it will peel. the auto clear needs a sand scratch to make it stick. it will not stick to the polished surface. powder bakes into the surface and it will not peel.
looks great. if you can take it apart and get all the seals out of it, powder coating clear would be your best way to go. as i had done to all the polished parts on my show car. holds up great.
hello, thay are h/m log manifolds plus the snails that i took off my ride. i bought some other hi-po ones. i gasket ported them and ported inside the log. work well up to 350 hp. 300.00 for the pair...
i also have 289/302/351w h/m manifolds with the snails 300.00. that i had ported. and a power steering ram for volvo upgrade new in box kit, never used. kit has mount bracket and hoses and the ram...
anyone ever try a ron hill 4 blade? he has them listed on ebay for a volvo aq. he offers them up to 26 pitch.
sweet thanks fixx!
i did post pics???? thats what i have is a 14 by 26 ultra.
fixx, who labbed you ultra?
i ground off a good 3/4 of a inch. mostly in the front at the nose cone. only took off 1/4 at the case, per side. knife edged all leading edges. took off 1/4 at rear of skeg and case. filled in the...
23 solas in stock here http://www.firstchoicemarine.com/search.aspx?SearchTerm=+8842-156-23. hay maddad have you tryed to grind a 280 drive thinner? i ground mine ill let you know if it helps. ground...