1996 Donzi 16' Classic with trailer
SS drive
New motor - 350 w/Whipple blower
New headers
New wiring
Interior is excellent
Exterior is excellent
Trailer needs some minor cosmetic work.
Too...
Type: Posts; User: Fluffy Foo-Foo; Keyword(s):
1996 Donzi 16' Classic with trailer
SS drive
New motor - 350 w/Whipple blower
New headers
New wiring
Interior is excellent
Exterior is excellent
Trailer needs some minor cosmetic work.
Too...
Greg,
I'll be at the lake hopefully this weekend. If not I t will be next weekend.
My 16 is a 96
What do you need?
Bump
Still for sale
1996 Donzi 16' Classic with trailer
SS drive
New motor - 350 w/Whipple blower
New headers
New wiring
Interior is excellent
Exterior is excellent
Trailer needs some minor cosmetic work.
Too...
731927319373194
For what its worth. My 16 used screws that had a custom decorative cap to hide the screw heads after tightening down the panel. You may be able to cut your existing fabric exposing...
68619
I set the P/S pump and external water pump in the bilge piped and ready.
Motor drops in sideways and then you spin it in the boat. It's pretty obvious when you do it.
As mentioned you will NEED an...
Did the Fulton bolt on so my 16 fits in the garage. Took about 2 hours total to install.
They make weld on as well. Nice set up. Tongue swings back out of the way. They have 3X3 and 3X4 IIRC. Make...
This is listed in Baltimore's Craigslist but is located in Gaithersburg which is outside DC.
I live in Gaithersburg. If anybody needs eyes on it I can take a look.
Steve
Note $350K minimum bid to start!:nilly:
Saw this some time ago.
One of the best videos I've seen.
Had both my kids watch it.
VERY moving.
I'm no expert, but I am about 1/2 hour from Woodbine if anybody wants me to look at this boat.
Maybe they are having Watts build low pressure valves just for them.
I believe if you order enough of anything somebody will build you what you want.:wink:
I don't know how they changed the spring in the Watt's unit. I tried with one and you destroy the valve. The adjustable knob is swedged into the valve body during the manufacturing process preventing...
corvetteforum.com
Probably the largest forum out there.
Go to OT (off topic) for some of the best humor around!!
http://newjersey.craigslist.org/boa/1973064587.html
not a bow-rider but....
ultra has a GORGEOUS used bow-rider asking 36k
nice looking boats BYW
Have this 8 Qt. in my 16. I would hope it would fit a 22. Dimensions included.
http://www.cantonracingproducts.com/cgi-bin/commerce.cgi?preadd=action&key=18-110
http://www.gmperformanceparts.com
New, not rebuilt. Pretty good deal. Bolt and go.
Check with Harbormaster. He is selling the GM stuff.
http://www.donzi.net/forums/showthread.php?t=55938
Purchased my short block shown here:
http://www.cnc-motorsports.com/product.asp?ProdID=25237&CtgID=22977
More expensive, but with new 4340 crank and rods, plus other stuff.
It seems like they...
FWIW I tried to track down the manufacturer of Livorsi/Gaffrig gauges and found these guys. http://www.sanav.com
Tried to buy a receiver/antenna direct but they sent me to Livorsi!
There are a...
Damn Limey's!:)
Not trying to stir the pot, but it was asked on the original for sale post.
Where is this boat so someone can look at it?
Thanks
Steve
Town of Gaithersburg
County of Montgomery
State of Maryland
On the divider behind the rear seat.
Incredible. Kid's got spunk!
Greg, I was just kidding about the current and wind.
But it was downhill the whole way!:wink: