Yep another year older. Can't say it was a good birthday. Patti passed away on the 19th of December.
Type: Posts; User: Rootsy; Keyword(s):
Yep another year older. Can't say it was a good birthday. Patti passed away on the 19th of December.
I wouldn't be so sure of that Carl....
Godspeed Scot.
Give Bertram Boy a ring... he should be able to hook you up. The dash uses a stainless trim insert and the aluminum is black wrinkle.
Scot,
There should be a mobile template and plugin available for 4.X. I believe I had one installed when I had my 4.X license. I only have a 3.X license left so I cannot view anything 4.X...
Buddy,
The boat at one time had the clam shells but a previous owner removed them and most of the hardware and for some reason put rectangular vents. At some point water infiltrated the coring,...
Do not forget the safety equipment. Some of this stuff, if absorbed through skin or inhaled can potentially kill you or cause chronic effects down the road.
Be sure to acquire and thoroughly...
No worries Goat, this is my part time / Winter extra income gig... Though I've moved on to custom flintlocks only.... My gun safe ran out of room a long time ago.
I sold her a long time ago...
Maybe I can interest you in this though...
*42" Green Mountain B weight tapered and flared - 50 Cal 1:70 twist
*Jim Chambers round faced English lock - uses a 7/8...
Weasel, if you actually knew 1/100th of what you spew you'd be dangerous.
John - There is opinion and there is fact. I don't tell anyone what to do or how to do it. I just state fact and my...
Donzi.net does belong to Mr. VanAlstine, him and him alone. If he chooses to turn the lights out at any moment there isn't a damn thing anyone can do except piss, moan and cry about it. Same goes...
Believe me, it is worth more than "something"....
When you are down and out you truly realize just who your true "friends" are. As has played out over the past 5 years and currently in this...
The hole that was started is where the ORIGINAL hole was placed by Donzi in '66. Slightly off center. The black marker line is the actual C/L of the hull.
Maybe in your world chief.... Unless you were asshole deep in fiberglass dust and resin in my shop how would you have any idea how "far" I got with it...
I guess 200 +/- hours of my life = "not...
WTF Carl.... WTF...
:rolleyes:
What is a 16 "barrelback"?????
If one was looking for a hatch, especially from an old boat, one would need a donor hatch or one usable to pull a mold from. Unless you are lucky enough to find one...
Buddy,
I'd love to see some photos of her as you progress...
The Mistress would have used the corner latches. You can see the evidence of where they used to be on the deck. Let me see if I can remember where to get some that are "close" to original
Edit....
Make sure you use the HD gear set in the upper. Take the lower apart to flush all of the metal out that got into it with the oil.
Going to need quite a few specialty tools to do it. Spanner...
Not only does the shifter need to be in forward, you need to make sure the drive is in forward. Those two parts need to mate or the drive will not go in the last inch or so...
To use an...
Alpha, Bravo, TRS, etc????? Which one are you trying to put back on? Merc spline grease on the splines as well as a smear on the o-rings.
If it is an Alpha, do you have the shifter in the...
Overkill, yes.. but when you own an EDM shop and not a LASER or waterjet I guess it is the natural way to go...
Screw the speedo and the trim gauge. No need for either... All you need is a GPS with speed... Trim bit by bit until speed drops off instead of increasing... I got to the point in the 16 that this...
I had one bid... ONE SINGLE F'ing bid...
The winner is... Tom, AKA Donzi Racer...