Some of the accessory brackets might not bolt on directly; might need to alter slightly ie drill out a hole size.
I would not recommend 3? exhaust on a 502 magnum; to get the 100hp increase you?ll...
Type: Posts; User: Pat McPherson; Keyword(s):
Some of the accessory brackets might not bolt on directly; might need to alter slightly ie drill out a hole size.
I would not recommend 3? exhaust on a 502 magnum; to get the 100hp increase you?ll...
Don?t give up on good old American v8 muscle power😳
With big power and short drive, I?d test couple 5 blades. Hydro P5X and Merc Max.
BBlades does have a good formula for adding bow lift from a Bravo 1.
If you can find a 27p Revolution 4, that?s a...
Would be a fun project to finish. Wish you were closer to me.
If you have an interest in selling that shorty out drive separately, I like to hear a price over pm.
I did create a Facebook account when I was looking for an 18? Donzi. I haven?t logged on in over a year. Had like 100 people for friend request; gosh sounds like a lot of work to keep up. I stick to...
Are you building a supper charged LS3 ?
I?ve been reading about all of the nice EFI options out there. Might go back to EFI some day.
I almost bought the Lightning headers for my 350 before...
Really cool but but?
For that money I?d much rather a Shelby?
I wonder if the price tag is more than she sold for in 96 ?
That is a really good idea Phil. I had tried working backwards connecting the riser, short hose a tip first before trying to attach the riser to the manifold and it was not going to mate up missing...
Happy New Year Chip!
Have a look at pic 1. The unmodified muffler is in the tip. Basically there?s a plate that blocks at 3? diameter. The exhaust and water is diverted through a louvered baffle...
Working on finalizing new tips. Modified a set of mufflers like I had for my 22. Just wait new trim rings.
Yes, working on installing full length Stainless risers and new thru hull tips. Will also install new shifter/throttle?
My thread is the new to me 1994 18c.
I have been suggesting the Merc Revolution 4 prop for many years on many different old school V bottom boats. My experience with a switch from Mirage/Mirage plus props is quite remarkable.
As...
I compare back to my Velocity and it had 4 full length strakes along with a pad bottom. The boat ran very level in the water. She was very efficient and did not require much positive trim to run...
Winter is here in the northeast so catching up on your progress 👍
I?ve seen a few of these local. Not a look I?d go for but have heard they are great performers?
Lines up pretty good👍
Personal have owned a couple of V bottom boats with pads on the bottom and both were very good handling boats. Dare I say, far less handling issues than I?ve experienced with my Donzi classic round...
Can wait to see some pictures 👍
Personally I prefer the 22C with and the 18C without.
Having the windshield on the 18C doesn?t block much wind but it can prevent waves from landing in your lap😳
Mock up 👍
I had tried a more flexible corrugated type hose. No way no how was the hose going to flex that much.
Not only is the there about a 3/4? offset, the angle of the riser vs tips are probably 10 or so...
The Eddie marine exhaust I installed exits at centerline about 3/4? out board of stock tip location. I want to use long risers I originally order so when I swap to hotter cam there will be no concern...
Only experience I have is with single engine boats with dual prop out drives.
Definitely better load carrying capabilities and handling on a single engine boat. Had good friend with 29? searay...
I?ve not pulled the deck on a Donzi so sorry no insight to share. Good luck with the restoration and please post progress.
My dad and I just started a resto on a 1980 Shamrock. Gonna build hot rod...
I also went the route of compound and wax. If the gel coat has not become too porous it works to a degree. I find the deck strip needs to be waxed twice as often as the rest of the boat to have a...