Search:

I will see if I can get a picture for you guys. The boat has a Chris Craft small block chevy with Corvette valve covers. It has a volvo drive on it. Have not been able to check your suggestions yet.

Thanks for the suggestions. Will take a look where you suggested.

I need some help finding the VIN number on a older 2 plus 3. There are no numbers on the transom. Did Donzi stamp them somewhere else on the early models?

I think your on the right track. I love the old school look. I think you need a boot stripe to finish her off. The only other thing I might do is lower the walk line slightly. I think it would look...

Another view.

http://youtu.be/ydxtlNBTXYM

Finally have one running in the boat!

http://youtu.be/r46GMZhKFww

The fuel lines are installed.

A little more to go on the Port motor's rigging and she will be ready to fire in the boat!

Doing a little rigging under the back seat. Trying to finish up the fuel system. Once that's done she should be ready to fire up!

The port motor is finally in the boat!

A lot of freshly painted parts. The port motor will be going in soon.

Going to add some EGT gauges. Think they will fit nice in front of the throttles.

Fitted the L brackets with the motor mount.

I sure did kill a polishing pad and I have three more to go. lol

Polished one of the L brackets tonight. I like it!

I like the look of the Motor mount. My oil cooler is going to mount to the back side, and I know it will make a million times easier to get to the hoses.

Back working on the Magnum. I rounded and rolled the edges on the L brackets. Then drilled some holes in the Motor Mount.

Our Engines are back from Stotler Racing. We set them back in the Pearl last nite.

Working on the rear of the port motor. Mounting the coil, cannon plug, the 50 amp breaker, and the starter relay.

When I made the first set of cooling pipes for the exhaust, I thout it was a real pain in the ass. Trying to dulpicate a second set to it to a whole nother level!

No I think I am going to run two pumps and keep everything seprate.

The Hat has brass plugs where fuel lines would go if you were using it on a Blower. One of my freinds ran Enderle injection on his drag boats, and he is going to set me up with a small injector and...

I am probably going to use a small injector in the hat with a push button elec fuel pump for start ups. Your prob right about the prop. One way or another she is going to be a wild ride!

I am running a Enderle belt driven pump. I am going to run a primer pump by the tank for start up. I have spoken to the guys at Enderle about my application. They informed me the pump supply and the...

Just got some powder coated parts back. My oil filter brackets and my H-Pipes came out great!