It sure would be cool to see a thread with everyone posting pics of their engines. Post up guys...
http://www.donzi.net/forums/attachme...1&d=1279816350
I like how this is mostly pictures, and low on comments. Some good looking engines!
Printable View
It sure would be cool to see a thread with everyone posting pics of their engines. Post up guys...
http://www.donzi.net/forums/attachme...1&d=1279816350
I like how this is mostly pictures, and low on comments. Some good looking engines!
http://www.donzi.net/forums/attachme...9&d=1283045926
Chevy 350Q
turned around
Good idea. This should get pretty cool.
http://i763.photobucket.com/albums/x...ng202Small.jpg
this is going to be a cool thread!
My engine in the GT21- nothing special, but it is special that I got an engine in at least after all the problems...!
710 HP ILMOR Viper V-10
Ted, can you actually get into the bilge, or does the engine need to be pulled for normal maintenance?
It is sweet looking.
Ken
Thanks Ken,
yes I can get IN and lay on either side for any maintenance...although looking at the pics you would never think it would be possible. Its really
no problem. I was very surprised after I installed the engine.
Here is another pic, showing a better angle.
Definatly enough room to swing a cat.
Ken
what size of boat are you running.wow
That's a really nice looking boat.i had to cut my hatch to make my carb fit under the hatch,Still looking for a hood scoop for mine.I really want to find something like the shellby 22 hood.Anybody now where to find one.
I was going to post a pick of my engine, but what's the point now that Ted posted his. :wink: :cool!:
Ask Josh @ Donzi Marine
josh@donzimail.net or 941.400.8494
http://www.donzidirect.com
We're open for business and shipping parts daily though. Call us at 888.441.1614. We accept all major credit cards.
Also making some real progress with the Custom Classic Studio and hope to have some things to show soon.
Josh
ok, the winner is already chosen, but please more pics for the guys who don't have so much $$$
Sbc 383
I have a couple more to post. (hopefully nobody minds a few more)
My other 22 with the 600SC Mercury.
I sold this one, but I might be buying it back soon...
Ted.... I forgot completely about this X18, let me know what you decide.. is it still in Fla?
Yes Jim, up in Boyton.
how fast Ted? handle good? very coool..
80 on gps, sqirley at wot but handles very well under 75. Idle in gear is 8 mph though.
Ok, sorry...
400 Dart with all the good stuff inside and out.
540 in my Sutphen
Not as bling bling as the X Man , but, hey I'v got 3 kids to put through school:nilly::nilly:.............Ed
Here is my 572 going in my yellow Hornet, if I ever get it finished.
Mr X;; Well my car is faster than your car ,, so there:lookaroun: ...Ed
Original 454 with original 150hrs its dirty and barely rusted on the external but the internals are as good as almost new. Not the prettiest engine here but ohh well.
ENJOY
Twin Ron Potter built 575's making 700hp.
First pic is from 2007 pre-Potter rebuild.
Bob
I am guessing you are in Covington Washington? Nice hanger and airplane.
I am in Gig Harbor. Not a lot of Donzis in our neck of the woods but my first ride was my girlfriend's baby 16...Mercury outboard. She kept it in Cozy Cove on Lake Washington at her aunt's (my mom's best friend) house. Not all that fast but loads of fun. I am now in the process of getting my engine ready for re-installation after #1 son had trailer issues and totaled boat. Long story but Dealer I bought boat from (for display at Seattle Boat show in 1996) borrowed my 1995 18C, then instead of returning to my home took it up to dealership in Kirkland and left it outside during cold hard freeze. Cracked both exhaust manifolds, which they replaced with cheap aftermarket Aqua Power manifolds, and unbeknownst to me also cracked block. That crack was undiscovered until this past summer when engine came out of boat to replace transom assbly and outdrive with a Bravo. Engine built by Chuck DeBois in Totem Lake at C&D Engine Performance.........383 Stroker plus other goodies. Engine goes into paint shop later this month, then pics to post.
Denis,
Yes Covington Wa...we are practically neighbors. Sorry to hear about neglected and damaged classic parts, but it sounds like the new engine will be sweet. I'm thinking a local Donzi event sometime in the near future?
http://www.donzi.net/forums/attachme...3&d=1216817988
Some 850 for the 26ZX. Made 942hp.