New 383 Stroker Scorpion 400 Horsepower @ 6000 RPM
383 Stroker Scorpion $7800.00
400 Horsepower @ 6000 RPM
This engine is basically new with only 6 hours only on it. These come from MerCruiser with CMI stainless steel marine headers.
These are kinda rare. This engine is configured for Bravo Outdrive.
This would really Rock a 16 or 18 classic. Call me, Scot VanAlstine at the
office 713-910-2000 if you have questions.
Specs are below:
Part Number 865108R61
Horsepower @ flywheel - 400
Kilowatts @ flywheel - 298
Maximum RPM (WOT) - 5600-6000
Cylinders - V-8 Remanufactured Iron Marine Block
Displacement (CID/L) - 383 / 6.3
Bore & Stroke (in/mm) - 4.03 x 3.75in
102 x 95mm
Compression Ratio - 9.6:1
Fuel / Ethanol Tolerance - 91 octane / up to 10% ethanol
Engine Control System - ECM 555 W/Knock Control & Crankshaft Trigger
Fuel Delivery System - GEN II Cool Fuel with Boost Pump
Fuel Injection System / Carburetor Type - Multi-point electronic fuel injection (MPI)
Induction System - Scorpion Tunnel Ram
Induction with 90mm throttle body
Charging alternator amp - 65
Charging alternator watt - 917
Water drain system - Multi-point drain
Cooling System 160F Raw Water Bravo with Sea Water Pump
Accessory Drive System - Serpentine belt
Lubrication - System High Flow 100 psi Oil Pump
Pistons - Forged Aluminum Alloy w/Teflon Coated Skirt
Cranktrain - Forged Steel Rods and 4340 forged Steel Crankshaft
Rocker Arms - 1.6:1 Full Roller Aluminum
Length - (in/mm) 32in / 814mm
Width - (in/mm) 30in / 740mm
Height - (in/mm) 22in / 559mm
Weight - (lbs/kg) 932lbs / 423kg
Harbormaster-trying to send you some $
Hey Scott, I have lost your phone # & email address, but I am trying to send you some $ for a donation. We sold a Donzi recently on the registry & wanted to send you a little something for the registry. Thanks, Tom email me at mishunaire@aol.com or call at 256-777-0844