Printable View
I have an X-18 with a 351 H/M Volvo 280 package.
The motor failed, and I built up a new 351W unit.
However, I can't get the Redline exhaust manifolds I have to seal properly at the riser gasket.
I am looking for replacements and don't know what to use.
Both Redline and Hi-Tek are out of business.
Stainless Marine does not support Ford products.
Any advice would be much appreciated.
Thanks,
Don
Hi Tek is not out of business. Rather, the business is for sale...
They are still producing exhaust systems.
they had a few businesses/dealers is this the Stateside co. or the down under co.?Quote:
Originally Posted by woobs
depending on how hot your motor is center risers may work from barr Osco indmar may be a choice as well
http://www.cpperformance.com/p-13919...num-riser.aspx
or there is always a custom set from $$$$$$ CMI $$$$$$$$$$
I e-mailed Allen (the owner of Hi-Tek in Australia). His response:Quote:
Originally Posted by mattyboy
"Hi Sean,
We're still open for business ,I don’t know who would have said that. If you can, can you get rid of that for me . I only have it for sale as I am 72 and I have been doing it for 25 years its someone else's turn.
Regards,
Allen."
Woobs thanks
good info
this is the American company not sure if they are still around
http://american-hi-tek.com/
They are probably a dealer/distributor. Although looking at their products, they may be an entirely different company.
At any rate, I always deal direct with Australia (and save) :)
I will contact HiTek and look into Barr.
Very much appreciate the advice and research.
- Don
the hi teks look the best by far, if the motor is not really warmed up the barr should be fine
http://bpi.ebasicpower.com/search_2/...volvo+manifold
I got hi teks For my ford from Allen a few years ago. Real nice guy and they where at my door in 2 weeks. And are Wickid nice