PDA

View Full Version : Help finding lifting ring



1Sweet16
09-18-2017, 06:37 AM
I need some help on locating a lifting ring for a 1993 Sweet 16. Who made these for Donzi? Was it Perko? The lift ring on the right was purchased from Donz direct and is not as thick and threaded base is only 5/8 (original is 3/4). Any leads out there? Thanks in advance. 8625786258

olredalert
09-18-2017, 11:24 AM
----Algonac cast products! You should be able to Google it. It probably would be good if you could E-mail that pic to them after the conversation. I have a used spare if you don't have any ring but it has gouges and needs rechroming.......Bill S

1Sweet16
09-18-2017, 05:16 PM
----Algonac cast products! You should be able to Google it. It probably would be good if you could E-mail that pic to them after the conversation. I have a used spare if you don't have any ring but it has gouges and needs rechroming.......Bill S

Bill thank you ! I'll check them out and get right back with you. Thanks again, Randall.

smokediver
09-19-2017, 02:23 PM
I am going to remove my rear ring to install a flag mount. It's in pretty good shape. Give me a ring or text at 239-777-2631. John

Ghost
09-19-2017, 02:45 PM
<tangent>
John,

I did this with my Cig, and did some light customizing in the shop so my flagpole base doubles as a Perko light mount. (Hated drilling too many holes in a freshly restored deck, and this way whichever one is deployed is centered on the transom.). Happy to share if it's of interest, but I figure you probably already have a sternlight mount off to one side.

Mike
</tangent>

smokediver
09-19-2017, 08:56 PM
Yeah , that sounds like a great idea but you guessed it , I already have a stern light base

f_inscreenname
09-25-2017, 12:24 AM
Not a 93 but here is one for a 67
http://www.ebay.com/itm/1967-Donzi-Ski-Sporter-Lift-Ring-/302460821919?hash=item466c11e19f:g:u4oAAOSwLApZwxu A&vxp=mtr